da | 165.1 | mm | |
Da | 319.999 | mm | |
Ca | 95.809 | mm | |
A1 | 180.975 | mm | |
A2 | 317.5 | mm | |
S | 4.763 | mm | |
ba | 75.406 | mm | |
H | 377.825 | mm | |
H1 | 190.5 | mm | |
H2 | 76.2 | mm | |
J | min. | 530.225 | mm |
J | max. | 600.075 | mm |
J1 | 117.475 | mm | |
L | 679.45 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 114.3 | mm | |
R2 | 41.275 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 60.325 | mm |
Housing |
SAFS 536
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-36-30
|
|||
Taconite seal | TER 149 | |||
|
End plug (suffix Y) |
EPR 19
|
Max. speed for Taconite seal | 460 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 84.5 | kN | |
P150° | 75.6 | kN | |
P180° | 89 | kN | |
Pa | 46.3 | kN |
Mass pillow block | 189 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 1304.1 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11514 | 29.3624 | 44.5 | 6.35 | Seals |
---|---|---|---|---|
30033 | 76.2 | 107.92 | 11.13 | Seals |
32024 X/DF | 120 | 180 | - | Bearings, units and housings |
415000 | 1360 | - | - | Seals |
60x105x8 CRW1 R | 60 | 105 | 8 | Seals |
62307-2RS1 | 35 | 80 | 31 | Bearings, units and housings |
62495 | 158.75 | 190.5 | 12.7 | Seals |
71911 CD/P4A | 55 | 80 | 13 | Bearings, units and housings |
85x110x12 HMS5 V | 85 | 110 | 12 | Seals |
NUP 228 ECM | 140 | 250 | 42 | Bearings, units and housings |
PCM 323620 E | 32 | 36 | 20 | Bearings, units and housings |
SAFS 23034 KA x 5.15/16 | 150.8125 | - | - | Bearings, units and housings |
Hot number:
130x170x12 HMSA10 V
32x42x7 CRW1 R
510/560 F
6220/VA201
71824 ACD/HCP4
71907 CE/P4A
86798
AXK 1528
D/W R2-2RZ
HJ 1032
KR 62 B
NJ 222 ECM
S71917 ACD/P4A
SAF 22234
SAFS 22516 x 2.5/8 TLC
Previous:SAFS 22536 x 6.1/2 Bearings, units and housings ---- Next:SAFS 22536 x 6.1/2 TLC Bearings, units and housings
Return to SKF bearing