da | 106.362 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 228.6 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 26.988 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SAFS 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Taconite seal | TER 113 | |||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 725 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1380/1328 | 22.225 | 52.388 | 19.368 | Bearings, units and housings |
---|---|---|---|---|
18926 | 47.625 | 88.9 | 11.13 | Seals |
23240 | 58.7502 | 88.9 | 6.35 | Seals |
407803 | 751 | - | - | Seals |
592934 | 412.75 | - | - | Seals |
95x130x12 CRW1 V | 95 | 130 | 12 | Seals |
BT4B 332997 B/HA1 | 287.5 | 440 | - | Bearings, units and housings |
C 4192 MB | 460 | 760 | 300 | Bearings, units and housings |
HK 1214 RS | 12 | 18 | 14 | Bearings, units and housings |
PF 17 FM | 17 | - | - | Bearings, units and housings |
SHT 35 | 35 | - | - | Coupling systems |
SNL 3084 ATURT | 400 | - | - | Bearings, units and housings |
Hot number:
1317 K + H 317
25082
33017/DF
7013 CE/HCP4AL
71915 CB/HCP4AL
87807
FY 506 M
FYE 1 15/16
KRV 26 B
OKCX 300
PBMF 253525 M1G1
SAF 1615 x 2.1/2
SAFS 23038 KATLC x 7
SAFS 23044 KAT x 7.15/16
SSAFS 22216 T
Previous:SAFS 23024 KAT x 4.1/8 Bearings, units and housings ---- Next:SAFS 23024 KAT-11 x 4 Bearings, units and housings
Return to SKF bearing