da | 103.188 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 155.575 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 26.988 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SAFS 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Labyrinth ring |
2 x LOR 111
|
|||
|
End plug (suffix Y) |
EPR 14
|
Bearing limiting speed | 4000 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
305-ZNR | 25 | 62 | 17 | Bearings, units and housings |
---|---|---|---|---|
527211 | 1193.8 | - | - | Seals |
6006/HR22T2 | 30 | 55 | 13 | Bearings, units and housings |
7021 ACD/P4AL | 105 | 160 | 26 | Bearings, units and housings |
71876 ACGAMB | 380 | 480 | 46 | Bearings, units and housings |
7204 BE-2RZP | 20 | 47 | 14 | Bearings, units and housings |
9308 | 23.8252 | 41.25 | 6.35 | Seals |
FY 1.3/8 FM | 34.925 | - | - | Bearings, units and housings |
PCZ 0810 E | 12.7 | 15.081 | 15.875 | Bearings, units and housings |
SAFS 23024 KAT x 4.1/4 | 107.95 | - | - | Bearings, units and housings |
SY 1.1/8 FM | 28.575 | - | - | Bearings, units and housings |
TU 1.1/4 TF | 31.75 | - | - | Bearings, units and housings |
Hot number:
401500
7307 BECBP
634-RZ
71916 ACD/HCP4AH1
806715
87777
90139
91396
FY 3/4 TF
NNU 4930 B/SPW33
PBMF 182512 M1G1
S7005 ACD/HCP4A
SAF 1520 TLC
SI 8 C
SYR 4 N-118
Previous:SAFS 23024 KA x 4 Bearings, units and housings ---- Next:SAFS 23024 KA x 4.1/4 Bearings, units and housings
Return to SKF bearing