da | 227.012 | mm | |
Da | 359.999 | mm | |
Ca | 107.798 | mm | |
A1 | 203.2 | mm | |
A2 | 390.525 | mm | |
ba | 89.694 | mm | |
H | 419.1 | mm | |
H1 | 209.55 | mm | |
H2 | 85.725 | mm | |
J | min. | 571.5 | mm |
J | max. | 635 | mm |
J1 | 127 | mm | |
L | 749.3 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 122.237 | mm | |
R2 | 42.862 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 56.356 | mm |
Housing |
SAFS 048 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8897
|
|||
Taconite seal | TER 552 | |||
|
End plug (suffix Y) |
X-5217-4
|
Max. speed for Taconite seal | 340 | r/min |
P60° | 364 | kN | |
P90° | 218 | kN | |
P120° | 136 | kN | |
P150° | 120 | kN | |
P180° | 145 | kN | |
Pa | 66.7 | kN |
Mass pillow block | 245 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 2154.6 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1400 VL R | 1270 | - | - | Seals |
---|---|---|---|---|
150x180x13 CRSH1 R | 150 | 180 | 13 | Seals |
16842 | 42.8752 | 68.22 | 7.95 | Seals |
35676 | 90.5002 | 123.85 | 11.13 | Seals |
38739 | 98.425 | 133.38 | 11.13 | Seals |
400075 | 6 | - | - | Seals |
7573 | 19.05 | 38.07 | 6.35 | Seals |
71907 CE/HCP4AH | 35 | 55 | 10 | Bearings, units and housings |
860x920x25 HDS1 R | 860 | 920 | 25 | Seals |
NJ 218 ECJ | 90 | 160 | 30 | Bearings, units and housings |
SI 10 E | 10 | - | 9 | Bearings, units and housings |
T4DB 200 | 200 | 270 | 37 | Bearings, units and housings |
Hot number:
1055x1100x25 HS8 D
305800 C-2RS1
30x55x7 CRW1 R
38x62x10 HMS5 V
550x610x25 HDS2 R
91366
KMFE 13 L
NK 15/16
NK 43/30
NNCF 4860 CV
SSAFS 22536 x 6.5/16 TLC
SY 1.1/2 WDW
SYR 3 15/16-3
W 630/2 R-2ZS
W 637/5 X-2Z
Previous:SAFS 23048 KAT x 8.1/2 Bearings, units and housings ---- Next:SAFS 23048 KAT x 8.7/16 Bearings, units and housings
Return to SKF bearing