da | 150 | mm | |
db | 168.275 | mm | |
dc | 146.05 | mm | |
Da | 269.999 | mm | |
Ca | 105.816 | mm | |
A1 | 158.75 | mm | |
A2 | 279.4 | mm | |
S | 4.763 | mm | |
ba | 77.787 | mm | |
H | 317.5 | mm | |
H1 | 160.35 | mm | |
H2 | 63.5 | mm | |
J | min. | 431.8 | mm |
J | max. | 463.55 | mm |
J1 | 95.25 | mm | |
L | 539.75 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 95.25 | mm | |
R2 | 39.688 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
End plug (suffix Y) |
EPR 17
|
Max. speed for Taconite seal | 460 | r/min |
P60° | 230 | kN | |
P90° | 138 | kN | |
P120° | 87.2 | kN | |
P150° | 80.1 | kN | |
P180° | 96.1 | kN | |
Pa | 43.2 | kN |
Mass pillow block | 92.5 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 623.7 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
140x180x12 HMSA10 RG | 140 | 180 | 12 | Seals |
---|---|---|---|---|
24015 CC/W33 | 75 | 115 | 40 | Bearings, units and housings |
65x80x8 HMSA10 RG | 65 | 80 | 8 | Seals |
7052 BGM | 260 | 400 | 65 | Bearings, units and housings |
FSAF 23024 KAT x 4.1/16 | 101.6 | - | - | Bearings, units and housings |
MVR2-15 | 15 | 32 | - | Seals |
NUP 219 ECML | 95 | 170 | 32 | Bearings, units and housings |
OKC 240 | 240 | - | ||
NU 2224 ECNML | 120 | 215 | 58 | Bearings, units and housings |
PSM 8095100 A51 | 80 | 95 | 100 | Bearings, units and housings |
SAW 23220 TLC | 180 | - | - | Bearings, units and housings |
YAR 207-107-2FW/VA201 | 36.512 | 72 | 42.9 | Bearings, units and housings |
Hot number:
1375240
550 VL R
7004 ACE/P4A
AXW 35
BSA 307 C
BD-C 2314 K-H 2314
C 3034 M
BD-C 3236 K-AH 3236 G
FY 3/4 TF/VA228
FYK 30 LD
KMT 26
KR 90 B
SAF 22314 T
SSAFS 22530 x 5.1/4 T
SYR 3 11/16 N-118
Previous:SAW 23230 Bearings, units and housings ---- Next:SAW 23230 TLC Bearings, units and housings
Return to SKF bearing