da | 134.938 | mm | |
Da | 269.999 | mm | |
Ca | 105.816 | mm | |
A1 | 158.75 | mm | |
A2 | 279.4 | mm | |
S | 4.763 | mm | |
ba | 77.787 | mm | |
H | 317.5 | mm | |
H1 | 160.35 | mm | |
H2 | 63.5 | mm | |
J | min. | 431.8 | mm |
J | max. | 463.55 | mm |
J1 | 95.25 | mm | |
L | 539.75 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 95.25 | mm | |
R2 | 39.688 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing |
SAW 530
|
|||
Bearing | ||||
Adapter sleeve assembly | SNW 130x5.5/16 | |||
Stabilizing ring |
SR-30-0
|
|||
Taconite seal | TER 127 | |||
|
End plug (suffix Y) |
EPR 16
|
Max. speed for Taconite seal | 575 | r/min |
P60° | 230 | kN | |
P90° | 138 | kN | |
P120° | 87.2 | kN | |
P150° | 80.1 | kN | |
P180° | 96.1 | kN | |
Pa | 43.2 | kN |
Mass pillow block | 92.5 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 623.7 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1325340 | 336.55 | 377.83 | 23.83 | Seals |
---|---|---|---|---|
21136 | 53.975 | 76.12 | 11.13 | Seals |
21379 | 53.975 | 92.02 | 11.91 | Seals |
25 VA R | 22 | - | - | Seals |
28x47x10 HMSA10 V | 28 | 47 | 10 | Seals |
32014T63 X/DB | 70 | 110 | - | Bearings, units and housings |
400104 | 9 | - | - | Seals |
FY 1.15/16 WF | 49.213 | - | - | Bearings, units and housings |
FYTB 1.3/16 TF | 30.163 | - | - | Bearings, units and housings |
N 1011 KPHA/SP | 55 | 90 | 18 | Bearings, units and housings |
OKF 210 | 210 | 475 | - | |
Z 006 | 30 | - | 5 | Seals |
Hot number:
37425/37625
6009-RS1
61948
70x90x8 CRW1 R
82510
BT4B 328345/HA1
D/W R3-2RZ
G 38x48x4
HA 2326
NKI 80/25
NU 1030 M/C3VL2071
PSM 182430 A51
S71902 ACD/P4A
W 617/6 R
XHCE 050/OK 130
Previous:SAW 23530 x 5.5/16 Bearings, units and housings ---- Next:SAW 23530 x 5.5/16 TLC Bearings, units and housings
Return to SKF bearing