da | 160 | mm | |
db | 177.8 | mm | |
dc | 153.988 | mm | |
Da | 289.999 | mm | |
Ca | 89.789 | mm | |
A1 | 158.75 | mm | |
A2 | 225.425 | mm | |
S | 4.763 | mm | |
ba | 70.644 | mm | |
H | 338.137 | mm | |
H1 | 169.875 | mm | |
H2 | 66.675 | mm | |
L | 558.8 | mm | |
Threaded holes | |||
R1 | 104.775 | mm | |
R2 | 33.337 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 52.388 | mm |
Housing |
SSAFS 232
|
|||
Bearing | ||||
|
||||
Lock nut | ||||
Lock washer | ||||
Stabilizing ring |
SR-32-0
|
|||
Labyrinth ring (db shaft position) |
LOR 156
|
|||
Labyrinth ring (dc shaft position) |
LOR 142
|
End plug (suffix Y) |
EPR 18
|
Bearing limiting speed | 2800 | r/min |
P60° | 226 | kN | |
P90° | 136 | kN | |
P120° | 85.9 | kN | |
P150° | 78.3 | kN | |
P180° | 94.3 | kN | |
Pa | 60.9 | kN |
Mass pillow block | 125 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 793.8 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1350 VL R | 1225 | - | - | Seals |
---|---|---|---|---|
1204 EKTN9 + H 204 | 17 | 47 | 14 | Bearings, units and housings |
12x32x7 HMS5 V | 12 | 32 | 7 | Seals |
BD-23032 CCK/W33-H 3032 | 140 | 240 | 60 | Bearings, units and housings |
32328 | 140 | 300 | 107.75 | Bearings, units and housings |
524973 | 755.65 | - | - | Seals |
7008 ACE/HCP4AL | 40 | 68 | 15 | Bearings, units and housings |
71916 CE/P4A | 80 | 110 | 16 | Bearings, units and housings |
99836 | 53.975 | 61.5188 | 23.8252 | Seals |
K 20x26x13 | 20 | 26 | 13 | Bearings, units and housings |
MS 3080-76 | - | - | 28 | Bearings, units and housings |
SAF 22620 x 3.5/16 TLC | 84.1375 | - | - | Bearings, units and housings |
Hot number:
15080
18549
49990
5966
87923
86722
BT4B 334106 G/HA1VA901
C 4060 M
FSYE 2 7/16 N-118
NJ 305 ECJ
NUP 3984 ECMA
RN-2.5x7.8 BF/G2
SNL 3172 ATURT
YARAG 207
YAR 208-108-2RF/HV
Previous:SSAFS 22230 TLC Bearings, units and housings ---- Next:SSAFS 22232 T Bearings, units and housings
Return to SKF bearing