da | 63.5 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 193.675 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 161.925 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
L | 285.75 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
SSAFS 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Taconite seal | TER 38 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 75.6 | kN | |
P90° | 45.4 | kN | |
P120° | 28 | kN | |
P150° | 25.4 | kN | |
P180° | 30.2 | kN | |
Pa | 6.94 | kN |
Mass pillow block | 14.3 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
165x190x15 HMSA10 V | 165 | 190 | 15 | Seals |
---|---|---|---|---|
24932 | 63.5 | 85.09 | 11.13 | Seals |
31758 | 80.9752 | 107.92 | 11.13 | Seals |
32020 X | 100 | 150 | 32 | Bearings, units and housings |
85885 | - | - | 31.75 | Seals |
BC4B 320455 | 820 | 1130 | - | Bearings, units and housings |
BEAM 020068-2RZ/PE | 20 | 68 | 28 | Bearings, units and housings |
D/W R6 R | 9.525 | 22.225 | 5.558 | Bearings, units and housings |
NKIA 5907 | 35 | 55 | 27 | Bearings, units and housings |
SHT 55 | 55 | - | - | Coupling systems |
SSAFS 22538 x 6.7/8 TLC | 174.625 | - | - | Bearings, units and housings |
W 607-2RZ | 7 | 19 | 6 | Bearings, units and housings |
Hot number:
20x32x7 HMSA10 V
35x47x6 HMSA10 V
405053
61821
7012 ACD/P4AL
7036 ACD/HCP4AL
BD-C 2226 K-AHX 3126
FYRP 1 7/16-3
IR 45x55x22
NU 222 ECML
QJ 1280 N2MA
SAF 1613 x 2.1/8 TLC
SAL 20 C
W 6009
W 61817-2Z
Previous:SSAFS 22515 x 2.1/2 Bearings, units and housings ---- Next:SSAFS 22515 x 2.3/8 Bearings, units and housings
Return to SKF bearing