

| da | 60.325 | mm | |
| Da | 130 | mm | |
| Ca | 37.008 | mm | |
| A1 | 79.375 | mm | |
| A2 | 193.675 | mm | |
| S | 3.175 | mm | |
| ba | 32.544 | mm | |
| H | 161.925 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| L | 285.75 | mm | |
| Threaded holes | |||
| R1 | 46.038 | mm | |
| R2 | 21.431 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing |
SSAFS 515
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-15-0
|
|||
| Taconite seal | TER 36 | |||
|
||||
| End plug (suffix Y) |
EPR 7
|
|||
| Max. speed for Taconite seal | 1250 | r/min |

| P60° | 75.6 | kN | |
| P90° | 45.4 | kN | |
| P120° | 28 | kN | |
| P150° | 25.4 | kN | |
| P180° | 30.2 | kN | |
| Pa | 6.94 | kN |
| Mass pillow block | 14.3 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 102 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 68.04 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1800257 | 457.2 | 495.3 | 19.05 | Seals |
|---|---|---|---|---|
| 370x420x25 HDS1 R | 370 | 420 | 25 | Seals |
| 7016 ACB/P4AL | 80 | 125 | 22 | Bearings, units and housings |
| 71914 ACD/P4AL | 70 | 100 | 16 | Bearings, units and housings |
| BT1B 332529/HA1 | 479.425 | 679.45 | 128.588 | Bearings, units and housings |
| BT2B 331837 | 384.175 | 546.1 | - | Bearings, units and housings |
| HK 1812 | 18 | 24 | 12 | Bearings, units and housings |
| MS 31/600-560 | - | - | 45 | Bearings, units and housings |
| N 313 ECM | 65 | 140 | 33 | Bearings, units and housings |
| NU 305 ECP | 25 | 62 | 17 | Bearings, units and housings |
| SAF 22609 x 1.1/2 T | 38.1 | - | - | Bearings, units and housings |
| SNL 3038 | 160 | - | - | Bearings, units and housings |
Hot number:
14844
25x50x10 HMS5 RG
27268
32311
6305-2Z/VA208
7201 BECBP
78790
ICOS-D1B03 TN9
KRV 30 B
NJ 2211 ECML
NNU 4876 K/W33
PF 17 TF
RNAO 5x10x8 TN
SAFS 22522 T
SYFWK 50 LTHR
Previous:SSAFS 22515 x 2.3/8 Bearings, units and housings ---- Next:SSAFS 22515 x 2.3/8 TLC Bearings, units and housings
Return to SKF bearing