

| da | 66.675 | mm | |
| Da | 140 | mm | |
| Ca | 42.799 | mm | |
| A1 | 88.9 | mm | |
| A2 | 133.35 | mm | |
| S | 4.763 | mm | |
| ba | 33.337 | mm | |
| H | 174.625 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| L | 330.2 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 31.75 | mm | |
| Housing |
SSAFS 516
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-16-13
|
|||
| Labyrinth ring |
2 x LOR 43
|
|||
|
||||
| End plug (suffix Y) |
EPR 8
|
|||
| Bearing limiting speed | 6000 | r/min |

| P60° | 83.2 | kN | |
| P90° | 49.8 | kN | |
| P120° | 30.2 | kN | |
| P150° | 26.7 | kN | |
| P180° | 31.6 | kN | |
| Pa | 7.83 | kN |
| Mass pillow block | 21.8 | kg |
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 87.885 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16076 MA | 380 | 560 | 57 | Bearings, units and housings |
|---|---|---|---|---|
| 1900254 | 482.6 | 520.7 | 19.05 | Seals |
| 71922 CD/P4A | 110 | 150 | 20 | Bearings, units and housings |
| 75x100x12 HMS5 RG | 75 | 100 | 12 | Seals |
| AOH 24184 | 400 | 420 | 310 | Bearings, units and housings |
| K 35x40x25 | 35 | 40 | 25 | Bearings, units and housings |
| K 81230 M | 150 | 215 | Bearings, units and housings | |
| K 89415 M | 75 | 160 | Bearings, units and housings | |
| NUP 2214 ECM | 70 | 125 | 31 | Bearings, units and housings |
| SAFS 22522 x 3.13/16 | 96.8375 | - | - | Bearings, units and housings |
| SAKB 20 F | 20 | - | 25 | Bearings, units and housings |
| W 40 | 202.7428 | 261.9502 | - | Bearings, units and housings |
Hot number:
12437
207-ZNR
30x47x6 HMS5 RG
35x47x6 HMS5 RG
51316
7004 CD/HCP4A
7308 BEGBM
FYJ 60 KF
GS 81207
K 89444 M
LM 451345/310
RSTO 40
SAF 22534
SSAFS 23024 KA x 4
YET 207-104
Previous:SSAFS 22516 x 2.3/4 TLC Bearings, units and housings ---- Next:SSAFS 22516 x 2.5/8 T Bearings, units and housings
Return to SKF bearing