da | 76.2 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 198.438 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 187.325 | mm | |
H1 | 95.25 | mm | |
H2 | 38.1 | mm | |
L | 330.2 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 84.5 | kN | |
P90° | 50.7 | kN | |
P120° | 31.6 | kN | |
P150° | 28.5 | kN | |
P180° | 34.7 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 24.9 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16054 | 41.275 | 53.98 | 6.35 | Seals |
---|---|---|---|---|
BD-23238 CCK/W33-AH 3238 G | 180 | 340 | 120 | Bearings, units and housings |
29260 | 300 | 420 | 73 | Bearings, units and housings |
408503 | 814 | - | - | Seals |
48x62x8 CRW1 P | 48 | 62 | 8 | Seals |
522679 | 444.5 | - | - | Seals |
6311 M | 55 | 120 | 29 | Bearings, units and housings |
67391/67322 | 133.35 | 196.85 | 46.038 | Bearings, units and housings |
HA 2340 L | 182.5625 | 200 | 176 | Bearings, units and housings |
HM 3164 | 42 | - | 320 | Bearings, units and housings |
OKTC 505 | - | 735 | - | |
YAR 209-2FW/VA228 | 45 | 85 | 49.2 | Bearings, units and housings |
Hot number:
10x22x7 HMS5 V
12x22x7 HMSA10 V
230/630 CA/W33
230x260x15 HMSA10 RG
27x37x7 HMSA10 RG
6312 N
BD-C 3180 KM-OH 3180 H
BD-C 3232 K-AH 3232 G
GEP 440 FS
GS 81104
NAO 15x32x12
PCM 556030 E
PRM 404430
SILKB 12 F
SYNT 65 L
Previous:SSAFS 22517 x 3 Bearings, units and housings ---- Next:SSAFS 22517 x 3 TLC Bearings, units and housings
Return to SKF bearing