da | 85.725 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
L | 387.35 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SSAFS 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal | TER 101 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 13.8 | kN |
Mass pillow block | 21.8 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120x180x15 HMSA10 V | 120 | 180 | 15 | Seals |
---|---|---|---|---|
1250 VL V | 1135 | - | - | Seals |
21352 | 53.975 | 85.62 | 9.53 | Seals |
BD-22219 EK-AHX 319 | 90 | 170 | 43 | Bearings, units and housings |
22225 | 56.9976 | 67.0052 | 5.9944 | Seals |
24445 | 61.9252 | 89.99 | 11.13 | Seals |
30x55x7 HMSA10 V | 30 | 55 | 7 | Seals |
6001/HR11QN | 12 | 28 | 8 | Bearings, units and housings |
99123 | 31 | 39.7002 | 10.9982 | Seals |
NNU 49/500 B/SPW33X | 500 | 670 | 170 | Bearings, units and housings |
SAF 22611 x 2 | 50.8 | - | - | Bearings, units and housings |
SAW 23524 T | 106.3625 | - | - | Bearings, units and housings |
Hot number:
12x24x7 HMSA10 V
BD-22240 CCK/W33-H 3140
23126 CC/W33
239/1180 CAF/W33
241/750 ECAK30/W33
25x50x10 HMS5 V
315
56137
595604
91357
BT4B 328923/HA1
D/W RW2 R-2RS1
FSNL 617 TURU
NJ 236 ECML
SNW 3136x6.1/2
Previous:SSAFS 22520 x 3.3/8 Bearings, units and housings ---- Next:SSAFS 22520 x 3.3/8 TLC Bearings, units and housings
Return to SKF bearing