da | 84.138 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
L | 387.35 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SSAFS 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal | TER 100 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 13.8 | kN |
Mass pillow block | 21.8 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22441 | 57.15 | 82.58 | 9.53 | Seals |
---|---|---|---|---|
406003 | 582 | - | - | Seals |
470691 | 670 | - | - | Seals |
67985/67920 | 206.375 | 282.575 | 46.038 | Bearings, units and housings |
591/850 M | 850 | 1000 | 90 | Bearings, units and housings |
6008 N | 40 | 68 | 15 | Bearings, units and housings |
60872 MA | 360 | 440 | 25 | Bearings, units and housings |
71918 CB/HCP4AL | 90 | 125 | 18 | Bearings, units and housings |
FYTB 35 TF | 35 | - | - | Bearings, units and housings |
NJ 215 ECP | 75 | 130 | 25 | Bearings, units and housings |
NKX 35 Z | 35 | 47 | 30 | Bearings, units and housings |
SAF 22536 | 163.5125 | - | - | Bearings, units and housings |
Hot number:
BD-23164 CCK/W33-OH 3164 H
28746
50x68x8 HMSA10 RG
526618
6304-ZNR
7328 BGAM
71907 ACB/P4A
85814
99131
BC2B 322969/HB1
HME 3188
PBM 182520 M1G1
SAF 22528 x 4.7/8
SAF 22620 x 3.1/2
SSAFS 23038 KATLC x 6.15/16
Previous:SSAFS 22520 x 3.5/16 Bearings, units and housings ---- Next:SSAFS 22520 x 3.5/16 TLC Bearings, units and housings
Return to SKF bearing