Bearings, units and housings -- Bearing housings -- Split pillow blocks, SAF and SAW series (inch dimensions) -- SAF and SAW pillow blocks with bearings on an adapter sleeve -- SKF SSAFS 22532
SSAFS 22532
Dimensions
| da | 138.113 | mm | |
| Da | 289.999 | mm | |
| Ca | 89.789 | mm | |
| A1 | 158.75 | mm | |
| A2 | 225.425 | mm | |
| S | 4.763 | mm | |
| ba | 70.644 | mm | |
| H | 338.137 | mm | |
| H1 | 169.875 | mm | |
| H2 | 66.675 | mm | |
| L | 558.8 | mm | |
| Threaded holes | |||
| R1 | 104.775 | mm | |
| R2 | 33.337 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
Included products
| Housing |
SSAFS 532
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-32-0
|
|||
| Labyrinth ring |
2 x LOR 130
|
|||
|
||||
Associated products
| End plug (suffix Y) |
EPR 16
|
|||
Speed ratings
| Bearing limiting speed | 2800 | r/min |
Recommended safe loads
| P60° | 226 | kN | |
| P90° | 136 | kN | |
| P120° | 85.9 | kN | |
| P150° | 78.3 | kN | |
| P180° | 94.3 | kN | |
| Pa | 38.5 | kN |
Mass
| Mass pillow block | 132 | kg |
Mounting information
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 793.8 | g | ||