da | 173.037 | mm | |
Da | 339.999 | mm | |
Ca | 101.803 | mm | |
A1 | 190.5 | mm | |
A2 | 276.225 | mm | |
S | 4.763 | mm | |
ba | 78.581 | mm | |
H | 398.462 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
L | 711.2 | mm | |
Threaded holes | |||
R1 | 120.65 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 61.913 | mm |
Housing |
SSAFS 538
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-38-32
|
|||
Labyrinth ring |
2 x LOR 153
|
|||
PosiTrac Plus contact element |
2 x B10724-155
|
|||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for PosiTrac Plus seal | 825 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 52.5 | kN |
Mass pillow block | 223 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 1672.65 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1400250 | 355.6 | 393.7 | 19.05 | Seals |
---|---|---|---|---|
16121 | 41.275 | 61.9 | 9.5 | Seals |
7011 ACE/HCP4AL1 | 55 | 90 | 18 | Bearings, units and housings |
7034 ACD/P4A | 170 | 260 | 42 | Bearings, units and housings |
71912 ACE/HCP4A | 60 | 85 | 13 | Bearings, units and housings |
BTM 95 ATN9/P4CDB | 95 | 145 | 45 | Bearings, units and housings |
IR 70x80x30 | 70 | 80 | 30 | Bearings, units and housings |
NA 4901.2RS | 12 | 24 | 13 | Bearings, units and housings |
PBMF 250270100 M1G1 | 250 | 270 | 100 | Bearings, units and housings |
S71911 ACD/HCP4A | 55 | 80 | 13 | Bearings, units and housings |
Z 209 F | 45 | - | 6 | Seals |
W 6300 | 10 | 35 | 11 | Bearings, units and housings |
Hot number:
1000250
1438321
BD-23052-2CS5K/VT143-OH 3052 HE
BD-23938 CCK/W33-H 3938
29685/29620
413506
51324 M
6006 NR
71915 ACE/HCP4AH1
AOH 32/850
BT4-8025 G/HA1VA903
HJ 2215 EC
JLM 710949/910
NK 14/16
PL 76
Previous:SSAFS 22538 x 6.13/16 T Bearings, units and housings ---- Next:SSAFS 22538 x 6.7/8 Bearings, units and housings
Return to SKF bearing