

| da | 177.8 | mm | |
| Da | 339.999 | mm | |
| Ca | 101.803 | mm | |
| A1 | 190.5 | mm | |
| A2 | 339.725 | mm | |
| S | 4.763 | mm | |
| ba | 78.581 | mm | |
| H | 398.462 | mm | |
| H1 | 200.025 | mm | |
| H2 | 79.375 | mm | |
| L | 711.2 | mm | |
| Threaded holes | |||
| R1 | 120.65 | mm | |
| R2 | 42.069 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 61.913 | mm | |
| Housing |
SSAFS 538
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-38-32
|
|||
| Taconite seal | TER 156 | |||
|
||||
| End plug (suffix Y) |
EPR 21
|
|||
| Max. speed for Taconite seal | 440 | r/min |

| P60° | 290 | kN | |
| P90° | 173 | kN | |
| P120° | 107 | kN | |
| P150° | 94.3 | kN | |
| P180° | 113 | kN | |
| Pa | 52.5 | kN |
| Mass pillow block | 223 | kg |
| Cap bolt |
4 x 7/8-9 UNC
|
|||
| Cap bolt recommended tightening torque | 528.8 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 1672.65 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 190 VL V | 171 | - | - | Seals |
|---|---|---|---|---|
| 29388 EM | 440 | 680 | 145 | Bearings, units and housings |
| 30x62x7 HMSA10 V | 30 | 62 | 7 | Seals |
| 61808 | 40 | 52 | 7 | Bearings, units and housings |
| 7016 ACE/HCP4A | 80 | 125 | 22 | Bearings, units and housings |
| BT4B 332078/HA4 | 1500 | 1900 | - | Bearings, units and housings |
| D/W R156 R-2ZS | 4.762 | 7.938 | 3.175 | Bearings, units and housings |
| LS 120155 | 120 | 155 | 7 | Bearings, units and housings |
| PRM 323620 | 32 | 36 | 20 | Bearings, units and housings |
| SAF 22626 x 4.1/2 TLC | 114.3 | - | - | Bearings, units and housings |
| TUJ 45 TF | 45 | - | - | Bearings, units and housings |
| YAR 205-2FW/VA201 | 25 | 52 | 15 | Bearings, units and housings |
Hot number:
10034
1220 VE R
22425
480 VE R
89324 M
H 2340
N 304 ECP
NKIB 5908
NU 208 ECJ
NU 2368 ECMA
QJ 303 N2MA
SY 2.7/16 TF/VA228
W 605-2Z
W 61815
YELAG 210
Previous:SSAFS 22538 x 7 Bearings, units and housings ---- Next:SSAFS 22538 x 7 TLC Bearings, units and housings
Return to SKF bearing