

| da | 198.438 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 368.3 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing |
SSAFS 544
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-44-38
|
|||
| Taconite seal | TER 165 | |||
|
||||
| End plug (suffix Y) |
EPR 23
|
|||
| Max. speed for Taconite seal | 385 | r/min |

| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 71.2 | kN |
| Mass pillow block | 365 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 2749.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1900563 | 482.6 | 533.4 | 22.23 | Seals |
|---|---|---|---|---|
| 22x45x7 HMS5 RG | 22 | 45 | 7 | Seals |
| 29372 | 360 | 560 | 122 | Bearings, units and housings |
| 690 VE R | 670 | - | - | Seals |
| 7022 CB/HCP4A | 110 | 170 | 28 | Bearings, units and housings |
| 950 VL R | 865 | - | - | Seals |
| C 3136 | 180 | 300 | 96 | Bearings, units and housings |
| FYJ 25 KF | 20 | - | - | Bearings, units and housings |
| IR 55x63x45 | 55 | 63 | 45 | Bearings, units and housings |
| OH 30/900 H | 850 | 900 | 400 | Bearings, units and housings |
| SAF 22617 x 3 | 76.2 | - | - | Bearings, units and housings |
| W 619/8 R | 8 | 19 | 6 | Bearings, units and housings |
Hot number:
1575 VRME R
211-2ZNR
26x38x7 HMS5 V
401604
6007/HR11QN
6210/HR22Q2
6212/VA201
AOH 241/670
BT4B 330944 AG/HA4
HE 2324
NATV 8 PPXA
PBM 152220 M1G1
PSM 141810 A51
SAL 8 E
SNP 152x9
Previous:SSAFS 22544 x 7.13/16 Bearings, units and housings ---- Next:SSAFS 22544 x 7.13/16 TLC Bearings, units and housings
Return to SKF bearing