

| da | 198.438 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 368.3 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing |
SSAFS 544
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-44-38
|
|||
| Taconite seal | TER 165 | |||
|
||||
| End plug (suffix Y) |
EPR 23
|
|||
| Max. speed for Taconite seal | 385 | r/min |

| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 71.2 | kN |
| Mass pillow block | 365 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 2749.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 17191 | 44 | 80 | 9 | Seals |
|---|---|---|---|---|
| 22213 EK | 65 | 120 | 31 | Bearings, units and housings |
| 4315 ATN9 | 75 | 160 | 55 | Bearings, units and housings |
| 52x72x8 HMSA10 V | 52 | 72 | 8 | Seals |
| 65x140x12 HMS5 V | 65 | 140 | 12 | Seals |
| 7006 ACE/HCP4AL | 30 | 55 | 13 | Bearings, units and housings |
| 7303 BEP | 17 | 47 | 14 | Bearings, units and housings |
| 90786 | - | - | 25 | Seals |
| FYJ 75 TF | 75 | - | - | Bearings, units and housings |
| NU 2304 ECP | 20 | 52 | 21 | Bearings, units and housings |
| SAF 22520 x 3.1/2 TLC | 88.9 | - | - | Bearings, units and housings |
| SAFS 22518 T | 80.9625 | - | - | Bearings, units and housings |
Hot number:
17x32x7 HMSA10 RG
22205 EK
25x37x6 HMS5 RG
32226
331290
6210 M
6523
7018 CD/HCP4A
71968 ACMB
7203 BEY
C 4130 V
FYK 25 TF
SAF 1522 x 3.13/16 TLC
SAF 1622 x 3.7/8 TLC
SAF 23032 KAT x 5.1/2
Previous:SSAFS 22544 x 7.13/16 Bearings, units and housings ---- Next:SSAFS 22544 x 7.13/16 TLC Bearings, units and housings
Return to SKF bearing