

| da | 200.025 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 311.15 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing |
SSAFS 544
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-44-38
|
|||
| Labyrinth ring |
2 x LOR 166
|
|||
|
||||
| End plug (suffix Y) |
EPR 23
|
|||
| Bearing limiting speed | 2000 | r/min |

| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 71.2 | kN |
| Mass pillow block | 365 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 1/2-13 UNC
|
|||
| Initial grease fill | 2749.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 294/600 EM | 600 | 1030 | 258 | Bearings, units and housings |
|---|---|---|---|---|
| 31147 | 79.375 | 101.68 | 11.13 | Seals |
| 400051 | 4 | - | - | Seals |
| 7018 ACE/HCP4AL1 | 90 | 140 | 24 | Bearings, units and housings |
| 729 ACD/P4A | 9 | 26 | 8 | Bearings, units and housings |
| AN 15 | 15.3416 | - | 74.4982 | Bearings, units and housings |
| C 39/1060 MB | 1060 | 1400 | 250 | Bearings, units and housings |
| FSAF 22613 T | 55.5625 | - | - | Bearings, units and housings |
| H 320 | 90 | 130 | 71 | Bearings, units and housings |
| NCF 2976 V | 380 | 520 | 82 | Bearings, units and housings |
| NU 310 ECML | 50 | 110 | 27 | Bearings, units and housings |
| SYE 1 7/16-18 | 36.5125 | - | - | Bearings, units and housings |
Hot number:
10112
13112
16007/HR22Q2
28x52x7 HMSA10 V
42x66x10 HMS5 V
52206
52407
524592
61801
7203 BE-2RZP
81128 TN
99840
NJ 228 ECML
SNL 516-613
TU 55 FM
Previous:SSAFS 22544 x 7.13/16 TLC Bearings, units and housings ---- Next:SSAFS 22544 x 7.7/8 T Bearings, units and housings
Return to SKF bearing