da | 114.3 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 234.95 | mm | |
ba | 51.594 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.922 | mm |
Housing |
SSAFS 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Taconite seal | TER 118 | |||
|
End plug (suffix Y) |
EPR 15
|
Max. speed for Taconite seal | 700 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 52.2 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23136 CCK/W33 | 180 | 300 | 96 | Bearings, units and housings |
---|---|---|---|---|
26x37x7 HMS5 V | 26 | 37 | 7 | Seals |
32017 X/DF | 85 | 130 | - | Bearings, units and housings |
55x78x9 HMS1 R | 55 | 78 | 9 | Seals |
6205 NR | 25 | 52 | 15 | Bearings, units and housings |
6303/HR11QN | 17 | 47 | 14 | Bearings, units and housings |
78x100x10 HMSA10 RG | 78 | 100 | 10 | Seals |
FYTBK 35 LF | 35 | - | - | Bearings, units and housings |
NJ 2322 ECP | 110 | 240 | 80 | Bearings, units and housings |
PWM 607060 | 60 | 70 | 60 | Bearings, units and housings |
SAFS 22520 TLC | 87.3125 | - | - | Bearings, units and housings |
SAW 23532 x 5.1/2 TLC | 139.7 | - | - | Bearings, units and housings |
Hot number:
10598
190x220x12 HMS5 RG1
19615
22328 CCKJA/W33VA405
28x44x6 HMS5 V
300x340x18 HDS1 D
32x55x10 HMS5 V
65x110x10 HMSA10 V
7016 ACE/HCP4AL
G 19x27x4
NCF 18/1120 V
NNF 5011 ADB-2LSV
SAF 22616 x 2.5/8
SY 40 LDW
YET 209-110
Previous:SSAFS 23026 KA x 4.7/16 Bearings, units and housings ---- Next:SSAFS 23026 KAT x 4.3/8 Bearings, units and housings
Return to SKF bearing