da | 177.8 | mm | |
Da | 289.999 | mm | |
Ca | 89.789 | mm | |
A1 | 158.75 | mm | |
A2 | 225.425 | mm | |
ba | 69.85 | mm | |
H | 338.137 | mm | |
H1 | 169.875 | mm | |
H2 | 66.675 | mm | |
L | 558.8 | mm | |
Threaded holes | |||
R1 | 104.775 | mm | |
R2 | 33.337 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SSAFS 038 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-38
|
|||
Labyrinth ring |
2 x LOR 156
|
|||
PosiTrac Plus contact element |
2 x B10724-155
|
|||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for PosiTrac Plus seal | 825 | r/min |
P60° | 226 | kN | |
P90° | 136 | kN | |
P120° | 85.9 | kN | |
P150° | 78.3 | kN | |
P180° | 94.3 | kN | |
Pa | 40 | kN |
Mass pillow block | 132 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 793.8 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
260x290x16 HDS2 V | 260 | 290 | 16 | Seals |
---|---|---|---|---|
3094 | 7.9502 | 17.42 | 7.95 | Seals |
38649 | 98.425 | 120.68 | 9.53 | Seals |
54312 + U 312 | 50 | 110 | 70.7 | Bearings, units and housings |
524220 | 889 | - | - | Seals |
BC2B 322191 | 723.98 | 927.2 | 190 | Bearings, units and housings |
GEZ 106 TXE-2LS | 34.925 | 55.563 | 30.15 | Bearings, units and housings |
GS 89314 | 70 | 125 | 12 | Bearings, units and housings |
NKIS 35 | 35 | 58 | 22 | Bearings, units and housings |
PWM 253030 | 25 | 30 | 30 | Bearings, units and housings |
SIL 20 ESX-2LS | 20 | - | 16 | Bearings, units and housings |
SNW 112x2.1/16 | 52.3875 | 80.2894 | 67.2846 | Bearings, units and housings |
Hot number:
32222T122/DB
51205 V/HR11Q1
55x78x10 HMS5 V
62x80x10 HMS5 V
6x16x5 HMS5 V
71920 ACB/HCP4A
DMB 16/20
FSAF 1317
FY 1.15/16 WDW
KD10-454
MS 31/900
NU 212 ECM/HC5C3
PSM 9011080 A51
PSMF 202816 A51
SAW 23524 x 4.1/16
Previous:SSAFS 23038 KATLC x 6.7/8 Bearings, units and housings ---- Next:SSAFS 23040 KA x 7.1/4 Bearings, units and housings
Return to SKF bearing