da | 176.213 | mm | |
Da | 289.999 | mm | |
Ca | 89.789 | mm | |
A1 | 158.75 | mm | |
A2 | 290.512 | mm | |
ba | 69.85 | mm | |
H | 338.137 | mm | |
H1 | 169.875 | mm | |
H2 | 66.675 | mm | |
L | 558.8 | mm | |
Threaded holes | |||
R1 | 104.775 | mm | |
R2 | 33.337 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SSAFS 038 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-38
|
|||
Taconite seal | TER 155 | |||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for Taconite seal | 440 | r/min |
P60° | 226 | kN | |
P90° | 136 | kN | |
P120° | 85.9 | kN | |
P150° | 78.3 | kN | |
P180° | 94.3 | kN | |
Pa | 40 | kN |
Mass pillow block | 132 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 793.8 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
140x160x12 HMS5 RG | 140 | 160 | 12 | Seals |
---|---|---|---|---|
22565 | 57.15 | 87.38 | 6.35 | Seals |
45x58x7 HMS5 RG | 45 | 58 | 7 | Seals |
524217 | 755.65 | - | - | Seals |
66230 | 168.275 | 203.2 | 12.7 | Seals |
FSAF 22515 x 2.1/2 | 63.5 | - | - | Bearings, units and housings |
MB 33 | 165 | 222 | - | Bearings, units and housings |
NKS 22 | 22 | 35 | 20 | Bearings, units and housings |
NU 2256 ECML | 280 | 500 | 130 | Bearings, units and housings |
NUP 310 ECJ | 50 | 110 | 27 | Bearings, units and housings |
SAFS 22538 x 6.13/16 TLC | 173.0375 | - | - | Bearings, units and housings |
SSAFS 22522 x 4 TLC | 101.6 | - | - | Bearings, units and housings |
Hot number:
145x170x13 CRSA1 R
17707
2315 M
408002
529086
6319-Z
6016
60x85x8 HMSA10 V
61235
N 900
NU 20/530 ECMA
RNA 4908.2RS
RNU 205 ECP
SC 20 ES
SYR 3 1/2 N-118
Previous:SSAFS 23038 KAT x 6.13/16 Bearings, units and housings ---- Next:SSAFS 23038 KAT x 6.7/8 Bearings, units and housings
Return to SKF bearing