da | 184.15 | mm | |
Da | 309.999 | mm | |
Ca | 95.809 | mm | |
A1 | 171.45 | mm | |
A2 | 319.087 | mm | |
ba | 74.612 | mm | |
H | 358.775 | mm | |
H1 | 179.4 | mm | |
H2 | 69.85 | mm | |
L | 628.65 | mm | |
Threaded holes | |||
R1 | 115.888 | mm | |
R2 | 37.306 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 49.212 | mm |
Housing |
SSAFS 040 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-40
|
|||
Taconite seal | TER 160 | |||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for Taconite seal | 425 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 85.9 | kN | |
P150° | 77 | kN | |
P180° | 92.5 | kN | |
Pa | 48.9 | kN |
Mass pillow block | 160 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 878.85 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13676 | 34.925 | 57.15 | 7.95 | Seals |
---|---|---|---|---|
17461 | 44.45 | 66.62 | 6.35 | Seals |
20x47x7 HMS5 RG | 20 | 47 | 7 | Seals |
2220 KM | 100 | 180 | 46 | Bearings, units and housings |
706 ACD/HCP4AH | 6 | 17 | 6 | Bearings, units and housings |
AOH 3152 G | 240 | 260 | 172 | Bearings, units and housings |
BT4B 332666/HA1 | 571.5 | 812.8 | - | Bearings, units and housings |
GEZ 100 ES | 25.4 | 41.275 | 22.225 | Bearings, units and housings |
PCM 081012 E | 8 | 10 | 12 | Bearings, units and housings |
SAFS 22516 | 68.2625 | - | - | Bearings, units and housings |
SSAFS 23028 KA x 4.13/16 | 122.2375 | - | - | Bearings, units and housings |
SYK 30 WD | 30 | - | - | Bearings, units and housings |
Hot number:
40x65x10 HMS5 RG
5046
53411 + U 411
618/8
61838
7024 ACE/HCP4AH1
86435
ECY 205
K 32x40x25
NUP 2210 ECP
OKC 740
PRM 404450
SAFS 22240 T
SY 1.1/4 LDW
SYWK 1.1/4 YTH
Previous:SSAFS 23040 KA x 7.3/16 Bearings, units and housings ---- Next:SSAFS 23040 KAT x 7.1/8 Bearings, units and housings
Return to SKF bearing