da | 227.012 | mm | |
Da | 359.999 | mm | |
Ca | 107.798 | mm | |
A1 | 203.2 | mm | |
A2 | 390.525 | mm | |
ba | 89.694 | mm | |
H | 419.1 | mm | |
H1 | 209.55 | mm | |
H2 | 85.725 | mm | |
L | 749.3 | mm | |
Threaded holes | |||
R1 | 122.237 | mm | |
R2 | 42.862 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 56.356 | mm |
Housing |
SSAFS 048 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8897
|
|||
Taconite seal | TER 552 | |||
|
End plug (suffix Y) |
X-5217-4
|
Max. speed for Taconite seal | 340 | r/min |
P60° | 364 | kN | |
P90° | 218 | kN | |
P120° | 136 | kN | |
P150° | 120 | kN | |
P180° | 145 | kN | |
Pa | 66.7 | kN |
Mass pillow block | 251 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 2154.6 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13671 | 34.925 | 57.15 | 7.95 | Seals |
---|---|---|---|---|
311-2ZNR | 55 | 120 | 29 | Bearings, units and housings |
40x59x8 HMSA10 V | 40 | 59 | 8 | Seals |
4200 ATN9 | 10 | 30 | 14 | Bearings, units and housings |
50x85x8 CRW1 R | 50 | 85 | 8 | Seals |
59180 F | 400 | 480 | 48 | Bearings, units and housings |
806715 | 374.65 | 424.053 | - | Seals |
91399 | - | - | 30 | Seals |
NJ 224 ECM | 120 | 215 | 40 | Bearings, units and housings |
OKTC 750 | - | 1080 | - | |
PWTR 17.2RS | 17 | 40 | 21 | Bearings, units and housings |
SY 1. TDW | 25.4 | - | - | Bearings, units and housings |
Hot number:
1300 VA R
16960
211 NR
607/HR11QN
62x90x10 HMS5 RG
719/8 ACE/HCP4AH
80x125x12 HMSA10 RG
99163
NCF 2234 V
NNCL 4838 CV
OKBS 51
PCMW 386201.5 M
SAW 23530 TLC
W 63801-2RZ
YAR 207-107-2F
Previous:SSAFS 23048 KAT x 8.1/2 Bearings, units and housings ---- Next:SSAFS 23048 KAT x 8.7/16 Bearings, units and housings
Return to SKF bearing