da | 215.9 | mm | |
Da | 359.999 | mm | |
Ca | 107.798 | mm | |
A1 | 203.2 | mm | |
A2 | 295.275 | mm | |
ba | 89.694 | mm | |
H | 419.1 | mm | |
H1 | 209.55 | mm | |
H2 | 85.725 | mm | |
L | 749.3 | mm | |
Threaded holes | |||
R1 | 122.237 | mm | |
R2 | 42.862 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 56.356 | mm |
Housing |
SSAFS 048 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8897
|
|||
Labyrinth ring |
2 x LOR 551
|
|||
|
End plug (suffix Y) |
X-5217-4
|
Bearing limiting speed | 1900 | r/min |
P60° | 364 | kN | |
P90° | 218 | kN | |
P120° | 136 | kN | |
P150° | 120 | kN | |
P180° | 145 | kN | |
Pa | 66.7 | kN |
Mass pillow block | 251 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 2154.6 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
20158 | 50.8 | 101.68 | 11.13 | Seals |
---|---|---|---|---|
50x75x10 HMSA10 V | 50 | 75 | 10 | Seals |
618/1120 MA | 1120 | 1360 | 106 | Bearings, units and housings |
610x660x20 HDS2 R | 610 | 660 | 20 | Seals |
790 VRME R | 759 | - | - | Seals |
C 3138 KV | 190 | 320 | 104 | Bearings, units and housings |
IR 12x15x16 | 12 | 15 | 16 | Bearings, units and housings |
KR 52 XB | - | 52 | 66 | Bearings, units and housings |
NK 75/35 | 75 | 92 | 35 | Bearings, units and housings |
RSTO 35 | 42 | 72 | 19.8 | Bearings, units and housings |
SAFS 22532 x 5.1/2 TLC | 139.7 | - | - | Bearings, units and housings |
SSAFS 22536 x 6.5/16 TLC | 160.3375 | - | - | Bearings, units and housings |
Hot number:
22x42x10 HMSA10 RG
30x42x6 HMS5 V
31306
47382
61806
709 CE/P4AH
725 VA V
HME 3160
NA 4901
NU 29/630 ECMA/HB1
NKI 45/35 TN
PL 88
SAF 22609-210
SNL 3256
SY 2. TF/VA228
Previous:SSAFS 23044 KATLC x 8 Bearings, units and housings ---- Next:SSAFS 23048 KA x 8.15/16 Bearings, units and housings
Return to SKF bearing