Material | Cast iron |
d | 12.7 | mm | |
A | 32 | mm | |
A1 | 18 | mm | |
B1 | 28.6 | mm | |
H | 57 | mm | |
H1 | 30.2 | mm | |
H2 | 14 | mm | |
J | 97 | mm | |
J | max. | 106 | mm |
J | min. | 88 | mm |
L | 127 | mm | |
N | 20.5 | mm | |
N1 | 11.5 | mm | |
s1 | 22.1 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 1 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 118 | mm | |
J7 | 11.5 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 9.56 | kN | |
Basic static load rating | C0 | 4.75 | kN | |
Fatigue load limit | Pu | 0.2 | kN | |
Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.52 | kg |
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
115x150x12 HMSA10 V | 115 | 150 | 12 | Seals |
---|---|---|---|---|
15518 | 39.7002 | 53.98 | 7.95 | Seals |
BD-240/900 ECAK30/W33-AOH 240/900 | 850 | 1280 | 375 | Bearings, units and housings |
27251 | 69.85 | 88.42 | 11.13 | Seals |
330862 B | 244.475 | 327.025 | - | Bearings, units and housings |
38x55x10 HMSA10 V | 38 | 55 | 10 | Seals |
529452 | 1003.3 | - | - | Seals |
567/563 | 73.025 | 127 | 36.512 | Bearings, units and housings |
6312 NR | 60 | 130 | 31 | Bearings, units and housings |
NU 1034 ML | 170 | 260 | 42 | Bearings, units and housings |
P 85 R-40 WF | 40 | - | - | Bearings, units and housings |
YARAG 206-102 | 28.575 | 62 | 38.1 | Bearings, units and housings |
Hot number:
13092
19970
30313
405256
623/HR11TN
7310 BEGBY
FYTB 1.1/8 TF
K 50x57x18
MB 48
MS 30/950
PCM 9510060 M
S71915 CE/P4A
SA 40 TXE-2LS
SAF 1320 TLC
SYF 507
Previous:SY 1.9/16 TF Bearings, units and housings ---- Next:SY 1/2 TF Bearings, units and housings
Return to SKF bearing