Material | Cast iron |
d | 38.1 | mm | |
A | 48 | mm | |
A1 | 30 | mm | |
A5 | 23.5 | mm | |
B | 49.2 | mm | |
H | 99 | mm | |
H1 | 49.2 | mm | |
H2 | 19 | mm | |
J | 135.5 | mm | |
J | max. | 146 | mm |
J | min. | 125 | mm |
L | 175 | mm | |
N | 24.5 | mm | |
N1 | 14 | mm | |
s1 | 30.2 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 161 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 2800 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.8 | kg |
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
110x140x12 HMSA10 V | 110 | 140 | 12 | Seals |
---|---|---|---|---|
1318 | 90 | 190 | 43 | Bearings, units and housings |
22336 CCJA/W33VA406 | 180 | 380 | 126 | Bearings, units and housings |
249/850 CAK30/W33 | 850 | 1120 | 272 | Bearings, units and housings |
32207/DF | 35 | 72 | - | Bearings, units and housings |
6217-Z | 85 | 150 | 28 | Bearings, units and housings |
91396 | - | - | 20 | Seals |
BT4B 328887 G/HA1VA901 | 482.6 | 615.95 | - | Bearings, units and housings |
D/W RW155 R | 3.967 | 7.938 | 3.571 | Bearings, units and housings |
NATV 17 | 17 | 40 | 20 | Bearings, units and housings |
NJ 2326 ECPA | 130 | 280 | 93 | Bearings, units and housings |
NNCL 4840 CV | 200 | 250 | 50 | Bearings, units and housings |
Hot number:
15649
230/710 CAK/W33
32938
407004
50x62x7 CRS1 R
55x72x10 HMSA10 V
6004
6312-2Z
G 55x63x5
OH 31/670 H
PCM 161810 E
SNL 3140
SNW 136x5.3/8
SYNT 90 F
W 627/6 XR
Previous:SY 1.1/2 TF/VA228 Bearings, units and housings ---- Next:SY 1.1/2 WDW Bearings, units and housings
Return to SKF bearing