Material | Cast iron |
d | 34.925 | mm | |
A | 45 | mm | |
A1 | 27 | mm | |
A5 | 24.5 | mm | |
B1 | 38.9 | mm | |
H | 93 | mm | |
H1 | 47.6 | mm | |
H2 | 19 | mm | |
J | 126 | mm | |
J | max. | 133 | mm |
J | min. | 119 | mm |
L | 160 | mm | |
N | 21 | mm | |
N1 | 14 | mm | |
s1 | 29.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 146 | mm | |
J7 | 15.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.55 | kg |
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1206 ETN9 | 30 | 62 | 16 | Bearings, units and housings |
---|---|---|---|---|
38x62x7 HMSA10 V | 38 | 62 | 7 | Seals |
401702 | 153 | - | - | Seals |
C 2317 | 85 | 180 | 60 | Bearings, units and housings |
FSAF 1617 x 2.7/8 T | 73.025 | - | - | Bearings, units and housings |
HK 3020 | 30 | 37 | 20 | Bearings, units and housings |
NJ 305 ECML | 25 | 62 | 17 | Bearings, units and housings |
NUP 211 ECJ | 55 | 100 | 21 | Bearings, units and housings |
PRMF 303430 | 30 | 34 | 30 | Bearings, units and housings |
QJ 1072 N2MA | 360 | 540 | 82 | Bearings, units and housings |
SSAFS 23040 KA x 7.3/16 | 182.5625 | - | - | Bearings, units and housings |
W 639-2Z | 9 | 30 | 10 | Bearings, units and housings |
Hot number:
207-2Z
230/950 CA/W33
29318 E
400220
53775
6204/HR11TN
71918 CB/HCP4AL
7204 BECBP
81280 M
85846
9995
SNP 3048x8.7/16
SNLN 3048
SSAFS 22524 x 4.1/8 TLC
W 627 R
Previous:SY 1.3/4 TF/VA228 Bearings, units and housings ---- Next:SY 1.3/8 LDW Bearings, units and housings
Return to SKF bearing