Material | Cast iron |
d | 33.338 | mm | |
A | 45 | mm | |
A1 | 27 | mm | |
A5 | 24.5 | mm | |
B1 | 38.9 | mm | |
H | 93 | mm | |
H1 | 47.6 | mm | |
H2 | 19 | mm | |
J | 126 | mm | |
J | max. | 133 | mm |
J | min. | 119 | mm |
L | 160 | mm | |
N | 21 | mm | |
N1 | 14 | mm | |
s1 | 29.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 146 | mm | |
J7 | 15.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.55 | kg |
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
30210 | 50 | 90 | 21.75 | Bearings, units and housings |
---|---|---|---|---|
30228/DF | 140 | 250 | - | Bearings, units and housings |
405753 | 560 | - | - | Seals |
79998 | 203.2 | 234.95 | 15.88 | Seals |
91329 | - | - | 20 | Seals |
99081 | 19.304 | 23.8252 | 11.1252 | Seals |
C 2222 K | 110 | 200 | 53 | Bearings, units and housings |
MB 5 A | 25 | 42 | - | Bearings, units and housings |
PCM 13013560 E | 130 | 135 | 60 | Bearings, units and housings |
PL 850 | - | - | 62.7126 | Bearings, units and housings |
RLS 5-2Z | 15.875 | 39.688 | 11.112 | Bearings, units and housings |
ZW 28x35 | 28 | 35 | 2 | Seals |
Hot number:
320x360x18 HDS1 R
53201 + U 201
65x85x8 HMS5 V
75053
99814
BT4B 334022 E1/C725
C 4032 K30V
FYTWR 40 YTHR
H 313
HME 31/600
NUH 2330 ECMH
S71908 CD/P4A
SI 15 C
SNL 3168 ATURA
SYK 25 WD
Previous:SY 1.3/8 WDW Bearings, units and housings ---- Next:SY 1.5/16 TF Bearings, units and housings
Return to SKF bearing