Material | Cast iron |
d | 36.513 | mm | |
A | 45 | mm | |
A1 | 27 | mm | |
A5 | 24.5 | mm | |
B1 | 51.1 | mm | |
H | 93 | mm | |
H1 | 47.6 | mm | |
H2 | 19 | mm | |
J | 126 | mm | |
J | max. | 133 | mm |
J | min. | 119 | mm |
L | 160 | mm | |
N | 21 | mm | |
N1 | 14 | mm | |
s1 | 32.3 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 146 | mm | |
J7 | 15.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.65 | kg |
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1180 VRME R | 1121 | - | - | Seals |
---|---|---|---|---|
17x29x5 HMSA10 RG | 17 | 29 | 5 | Seals |
403752 | 337 | - | - | Seals |
524205 | 254 | - | - | Seals |
53214 + U 214 | 70 | 105 | 27 | Bearings, units and housings |
BT4B 328083/HA1 | 333.375 | 469.9 | - | Bearings, units and housings |
GX 20 F | 20 | 55 | 20 | Bearings, units and housings |
P 20 TR | 20 | - | - | Bearings, units and housings |
SSAFS 22516 x 2.3/4 | 69.85 | - | - | Bearings, units and housings |
W 604 R-2Z | 4 | 12 | 4 | Bearings, units and housings |
YAR 204-012-2FW/VA228 | 19.05 | 47 | 31 | Bearings, units and housings |
ZW 20x28 | 20 | 28 | 2 | Seals |
Hot number:
91312
95x145x12 HMSA10 RG
BD-C 2316 K-AHX 2316
FYR 2 3/16-3
FYTWK 50 LTA
GAC 100 F
K 220x230x42
NKIS 15
NU 1005
NU 1876 ECMP
NUH 2332 ECMH/PEX
RMS 11
SILR 50 ES
W 6305-2RZ
W 61808 R
Previous:SY 1.7/16 WDW Bearings, units and housings ---- Next:SY 1.9/16 TF Bearings, units and housings
Return to SKF bearing