Material | Cast iron |
d | 25.4 | mm | |
A | 36 | mm | |
A1 | 22 | mm | |
A5 | 18 | mm | |
B | 34.1 | mm | |
H | 70 | mm | |
H1 | 36.5 | mm | |
H2 | 16 | mm | |
J | 102 | mm | |
J | max. | 110 | mm |
J | min. | 94 | mm |
L | 130 | mm | |
N | 19.5 | mm | |
N1 | 11.5 | mm | |
s1 | 19.8 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 2 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 120 | mm | |
J7 | 13 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.72 | kg |
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16006/HR11QN | 30 | 55 | 9 | Bearings, units and housings |
---|---|---|---|---|
25x42x7 HMSA10 V | 25 | 42 | 7 | Seals |
BD-C 39/750 KM-OH 39/750 HE | 710 | 1000 | 185 | Bearings, units and housings |
G 5x9x2 S | 5 | 9 | 2 | Seals |
NJ 322 ECJ | 110 | 240 | 50 | Bearings, units and housings |
MS 3060 | - | - | 24 | Bearings, units and housings |
NU 210 ECJ | 50 | 90 | 20 | Bearings, units and housings |
PCZ 2028 M | 31.75 | 35.719 | 44.45 | Bearings, units and housings |
PFD 25 FM | 25 | - | - | Bearings, units and housings |
S7024 CB/P4A | 120 | 180 | 28 | Bearings, units and housings |
W 602 X-2ZS | 2 | 7 | 3 | Bearings, units and housings |
W 63805 R | 25 | 37 | 10 | Bearings, units and housings |
Hot number:
22x40x10 HMS5 RG
24092 ECA/W33
241/530 ECA/W33
37387
3750272
7036 CD/P4AH1
BT4-0016 G/HA1C445VA901
FSAF 22517 TLC
K 30x37x16
P 47
PSM 141820 A51
SAFS 22515 x 2.1/2
SAKAC 10 M
SILA 80 ES-2RS
SYFWK 3/4 LTHR
Previous:SY 1. TDW Bearings, units and housings ---- Next:SY 1. TF/VA201 Bearings, units and housings
Return to SKF bearing