

| da | 41.275 | mm | |
| Da | 110 | mm | |
| Ca | 50.8 | mm | |
| A1 | 69.85 | mm | |
| A2 | 115.888 | mm | |
| S | 5.556 | mm | |
| ba | 34.925 | mm | |
| H | 147.637 | mm | |
| H1 | 76.2 | mm | |
| H2 | 28.575 | mm | |
| J | min. | 196.85 | mm |
| J | max. | 228.6 | mm |
| L | 269.875 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 42.862 | mm | |
| R2 | 19.05 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 34.925 | mm | |
| Housing |
SAF 610
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-0-10
|
|||
| Labyrinth ring |
2 x LER 19
|
|||
|
||||
| End plug (suffix Y) |
EPR 4
|
|||
| Bearing limiting speed | 6300 | r/min |

| P60° | 39.1 | kN | |
| P90° | 23.6 | kN | |
| P120° | 14.2 | kN | |
| P150° | 12.9 | kN | |
| P180° | 15.6 | kN | |
| Pa | 5.96 | kN |
| Mass pillow block | 10.7 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 53.865 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 15209 | 38.1 | 68.99 | 6.35 | Seals |
|---|---|---|---|---|
| 27x47x10 HMSA10 RG | 27 | 47 | 10 | Seals |
| 28646 | 73.025 | 87.224 | 7.468 | Seals |
| 34x44x8 HMS5 V | 34 | 44 | 8 | Seals |
| 403250 | 292 | - | - | Seals |
| 35x62x10 HMS5 RG | 35 | 62 | 10 | Seals |
| 60012 | 152.4 | 181 | 12.7 | Seals |
| 65 VA R | 58 | - | - | Seals |
| BT2B 334013/HA1 | 430 | 535 | - | Bearings, units and housings |
| NU 2319 ECML | 95 | 200 | 67 | Bearings, units and housings |
| PWM 758550 | 75 | 85 | 50 | Bearings, units and housings |
| W 619/5 R-2Z | 5 | 13 | 4 | Bearings, units and housings |
Hot number:
24038 CC/W33
30x52x7 HMS5 V
34283
608-2Z
6205/HC5C3
7016 ACD/P4AH1
D/W R156-2ZS
FYTB 1.3/8 TF
GEH 20 ESX-2LS
HK 2516
OH 30/710 HE
PWTR 30.2RS
SNL 3284
SSAFS 22540
SY 1/2 FM
Previous:SAF 22610 x 1.3/4 T Bearings, units and housings ---- Next:SAF 22610 x 1.5/8 T Bearings, units and housings
Return to SKF bearing