da | 42.862 | mm | |
Da | 110 | mm | |
Ca | 50.8 | mm | |
A1 | 69.85 | mm | |
A2 | 190.5 | mm | |
S | 5.556 | mm | |
ba | 34.925 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 28.575 | mm | |
J | min. | 196.85 | mm |
J | max. | 228.6 | mm |
L | 269.875 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 42.862 | mm | |
R2 | 19.05 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
SAF 610
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-10
|
|||
Taconite seal | TER 20 | |||
|
End plug (suffix Y) |
EPR 4
|
Max. speed for Taconite seal | 1800 | r/min |
P60° | 39.1 | kN | |
P90° | 23.6 | kN | |
P120° | 14.2 | kN | |
P150° | 12.9 | kN | |
P180° | 15.6 | kN | |
Pa | 5.96 | kN |
Mass pillow block | 10.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10944 | 27.9908 | 40.9956 | 7.0104 | Seals |
---|---|---|---|---|
145x175x15 HMS5 V | 145 | 175 | 15 | Seals |
18264 | 46.0502 | 76.2 | 9.53 | Seals |
19840 | 50.8 | 69.85 | 7.95 | Seals |
24028-2CS5/VT143 | 140 | 210 | 69 | Bearings, units and housings |
44x68x8 CRW1 V | 44 | 68 | 8 | Seals |
685x720x20 HDS2 R | 685 | 720 | 20 | Seals |
OKCX 570 | 570 | - | ||
RNA 4907 RS | 42 | 55 | 20 | Bearings, units and housings |
SAF 1222 TLC | 110 | - | - | Bearings, units and housings |
SNW 10x1.1/2 | 38.1 | 64.4144 | 44.577 | Bearings, units and housings |
W 60/1.5 | 1.5 | 6 | 2.5 | Bearings, units and housings |
Hot number:
29380
30303
47x70x10 HMS5 V
9409
BT4B 332824 E/C475
GB 4960
K 45x53x21
K 50x55x13.5
NKIS 55
SSAFS 22534 x 6 TLC
SSAFS 23028 KA x 4.7/8
W 63800-2Z
SYJ 80 TF
WBB1-8705 R-2Z
YAR 210-2RF/VE495
Previous:SAF 22610 Bearings, units and housings ---- Next:SAF 22610 x 1.3/4 Bearings, units and housings
Return to SKF bearing