da | 44.45 | mm | |
Da | 110 | mm | |
Ca | 50.8 | mm | |
A1 | 69.85 | mm | |
A2 | 115.888 | mm | |
S | 5.556 | mm | |
ba | 34.925 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 28.575 | mm | |
J | min. | 196.85 | mm |
J | max. | 228.6 | mm |
L | 269.875 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 42.862 | mm | |
R2 | 19.05 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
SAF 610
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-10
|
|||
Labyrinth ring |
2 x LER 21
|
|||
|
End plug (suffix Y) |
EPR 4
|
Bearing limiting speed | 6300 | r/min |
P60° | 39.1 | kN | |
P90° | 23.6 | kN | |
P120° | 14.2 | kN | |
P150° | 12.9 | kN | |
P180° | 15.6 | kN | |
Pa | 5.96 | kN |
Mass pillow block | 10.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1650580 | 419.1 | 469.9 | 25.4 | Seals |
---|---|---|---|---|
18626 | 47.625 | 68.22 | 7.95 | Seals |
248/800 CAMA/W20 | 800 | 980 | 180 | Bearings, units and housings |
32x72x7 HMS5 V | 32 | 72 | 7 | Seals |
43x62x8 HMSA10 RG | 43 | 62 | 8 | Seals |
9998 | 25.4 | 44.5 | 6.35 | Seals |
C 31/750 MB | 750 | 1220 | 365 | Bearings, units and housings |
FYRP 3 1/2-3 | 88.9 | - | - | Bearings, units and housings |
FYTB 1.1/2 RM | 38.1 | - | - | Bearings, units and housings |
KM 22 | 19 | - | 110 | Bearings, units and housings |
NJ 2216 ECML | 80 | 140 | 33 | Bearings, units and housings |
OKF 590 | 590 | 1245 | - |
Hot number:
BD-23138 CCK/W33-H 3138
3050785
408603
6312-RS1
70x90x8 CRW1 R
C 39/1500 MB
IR 25x30x26.5
JM 515649/610
NJ 209 ECPH
NKI 22/16
OKC 065
PCM 15015580 M
PCMF 182017 E
PCZ 4440 E
SAA 80 ES-2RS
Previous:SAF 22610 T Bearings, units and housings ---- Next:SAF 22610 x 1.3/4 T Bearings, units and housings
Return to SKF bearing