Material | Cast iron |
d | 74.613 | mm | |
A | 78 | mm | |
A1 | 48 | mm | |
B | 77.8 | mm | |
H | 175.5 | mm | |
H1 | 88.9 | mm | |
H2 | 47.5 | mm | |
J | 228.5 | mm | |
J | max. | 241 | mm |
J | min. | 216 | mm |
L | 305 | mm | |
N | 38 | mm | |
N1 | 25.5 | mm | |
s1 | 47.6 | mm | |
Threaded hole | |||
RG | 1/8-27 NPT | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.579 | mm | |
SWN | 11.113 | mm | |
GN | 1/8-27 NPT | ||
Dowel pins | |||
J6 | 285 | mm | |
J7 | 29 | mm | |
N4 | 3 | mm |
Basic dynamic load rating | C | 72.8 | kN | |
Basic static load rating | C0 | 53 | kN | |
Fatigue load limit | Pu | 2.16 | kN | |
Limiting speed | 2400 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 9.4 | kg |
Hexagonal key size for grub screw | N | 5.556 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 20 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.75 | in |
Housing |
SY 516 U
|
|||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
24x37x7 HMSA10 V | 24 | 37 | 7 | Seals |
---|---|---|---|---|
44x62x10 HMSA10 RG | 44 | 62 | 10 | Seals |
52x80x10 HMSA10 V | 52 | 80 | 10 | Seals |
86533 | - | - | 34.93 | Seals |
80x130x12 CRWA1 R | 80 | 130 | 12 | Seals |
99374 | 95.0722 | 102.3874 | 12.7 | Seals |
LM 567949/910/HA1 | 406.4 | 549.275 | 85.725 | Bearings, units and housings |
NU 317 ECM | 85 | 180 | 41 | Bearings, units and housings |
OKBS 123 | 123 | - | - | |
S7202 CD/HCP4A | 15 | 35 | 11 | Bearings, units and housings |
SAF 22615 x 2.3/8 | 60.325 | - | - | Bearings, units and housings |
W 6001-2RZ | 12 | 28 | 8 | Bearings, units and housings |
Hot number:
BD-230/900 CAK/W33-OH 30/900 H
32326
306-Z
61984 MA
95x145x12 HMSA10 V
GS 81244
K 195x205x37
K 20x28x25
RNA 69/22
RNA 69/28
SAF 22616
SAF 23036 KATLC x 6.7/16
SHT 22
SNL 3076 G
W 61701-2ZS
Previous:SY 2.11/16 TF Bearings, units and housings ---- Next:SY 2.15/16 TF/VA201 Bearings, units and housings
Return to SKF bearing