Material | Cast iron |
d | 69.85 | mm | |
A | 72 | mm | |
A1 | 48 | mm | |
B | 73.3 | mm | |
H | 166 | mm | |
H1 | 82.6 | mm | |
H2 | 33 | mm | |
J | 216 | mm | |
J | max. | 229 | mm |
J | min. | 203 | mm |
L | 279 | mm | |
N | 35 | mm | |
N1 | 22 | mm | |
s1 | 46.3 | mm | |
Threaded hole | |||
RG | 1/8-27 NPT | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.579 | mm | |
SWN | 11.113 | mm | |
GN | 1/8-27 NPT |
Basic dynamic load rating | C | 66.3 | kN | |
Basic static load rating | C0 | 49 | kN | |
Fatigue load limit | Pu | 2.04 | kN | |
Limiting speed | 2600 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 7.35 | kg |
Hexagonal key size for grub screw | N | 5.556 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 20 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.75 | in |
Housing |
SY 515 U
|
|||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1500 VRME R | 1419 | - | - | Seals |
---|---|---|---|---|
6218 N | 90 | 160 | 30 | Bearings, units and housings |
608/500 MA | 500 | 620 | 37 | Bearings, units and housings |
62212-2RS1 | 60 | 110 | 28 | Bearings, units and housings |
80x100x12 HMSA10 RG | 80 | 100 | 12 | Seals |
NJ 214 ECM | 70 | 125 | 24 | Bearings, units and housings |
NJ 219 ECML | 95 | 170 | 32 | Bearings, units and housings |
NRT 150 B | 150 | 240 | 40 | Bearings, units and housings |
NU 207 ECJ | 35 | 72 | 17 | Bearings, units and housings |
SHR 16 | 16 | - | - | Coupling systems |
SY 20 TDW | 20 | - | - | Bearings, units and housings |
W 61805-2RZ | 25 | 37 | 7 | Bearings, units and housings |
Hot number:
21307 CC
61824
71910 CE/P4AL
7312 BEGAY
FY 505 M
HM 3052
KMFE 9
NJ 348 ML
OKBS 42
NKI 55/35
OKBS 67
PCM 455030 M
S71919 CB/HCP4A
SALKB 20 F
YEL 212-2F
Previous:SY 2.3/16 TF/VA228 Bearings, units and housings ---- Next:SY 2.7/16 DUTF Bearings, units and housings
Return to SKF bearing