Material | Cast iron |
d | 61.913 | mm | |
A | 65 | mm | |
A1 | 35 | mm | |
B | 69.9 | mm | |
H | 153 | mm | |
H1 | 76.2 | mm | |
H2 | 39 | mm | |
J | 210 | mm | |
J | max. | 218 | mm |
J | min. | 202 | mm |
L | 260 | mm | |
N | 30 | mm | |
N1 | 22 | mm | |
s1 | 39.7 | mm | |
Threaded hole | |||
RG | 1/8-27 NPT | ||
R1 | 4.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.579 | mm | |
SWN | 11.113 | mm | |
GN | 1/8-27 NPT | ||
Dowel pins | |||
J6 | 240 | mm | |
J7 | 22.5 | mm | |
N4 | 3 | mm |
Basic dynamic load rating | C | 62.4 | kN | |
Basic static load rating | C0 | 45 | kN | |
Fatigue load limit | Pu | 1.86 | kN | |
Limiting speed | 2800 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 6.7 | kg |
Hexagonal key size for grub screw | N | 5.556 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 20 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.75 | in |
Housing |
SY 514 U
|
|||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
30x47x8 HMSA10 RG | 30 | 47 | 8 | Seals |
---|---|---|---|---|
400070 | 6 | - | - | Seals |
591/560 F | 560 | 670 | 67 | Bearings, units and housings |
594784 | 654.9898 | - | - | Seals |
650 VA V | 600 | - | - | Seals |
6763 | 17.4752 | 30.18 | 4.78 | Seals |
71917 CD/HCP4AH1 | 85 | 120 | 18 | Bearings, units and housings |
AH 2336 G | 170 | 180 | 154 | Bearings, units and housings |
NNCL 4964 CV | 320 | 440 | 118 | Bearings, units and housings |
OKC 540 | 540 | - | ||
PSM 607590 A51 | 60 | 75 | 90 | Bearings, units and housings |
RNA 4860 | 330 | 380 | 80 | Bearings, units and housings |
Hot number:
15910
22313 EK/VA405
319432 DA-2LS
51134 M
607/8-2Z
700 VE R
7015 CB/HCP4A
71913 ACD/HCP4AL
7213 BEP
BEAS 030062-2RS
FY 2.11/16 TF
FYR 3 7/16-18
HA 3134
NU 2304 ECP
OKF 650
Previous:SY 2.3/4 UTF Bearings, units and housings ---- Next:SY 2.7/16 TF Bearings, units and housings
Return to SKF bearing