| Material | Cast iron | |||



| d | 19.05 | mm | |
| A | 32 | mm | |
| A1 | 21 | mm | |
| A5 | 20.5 | mm | |
| B1 | 30.5 | mm | |
| H | 64.5 | mm | |
| H1 | 33.3 | mm | |
| H2 | 14 | mm | |
| J | 97 | mm | |
| J | max. | 106 | mm |
| J | min. | 88 | mm |
| L | 127 | mm | |
| N | 20.5 | mm | |
| N1 | 11.5 | mm | |
| s1 | 23.5 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 11.5 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed | 8500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.6 | kg |
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 10178 | 25.4 | 62.0014 | 9.525 | Seals |
|---|---|---|---|---|
| 1211 EKTN9 | 55 | 100 | 21 | Bearings, units and housings |
| 1319 | 95 | 200 | 45 | Bearings, units and housings |
| BD-241/750 ECAK30/W33-AOH 241/750 G | 710 | 1220 | 475 | Bearings, units and housings |
| 42433 | 107.95 | 133.38 | 11.13 | Seals |
| 7011 CB/HCP4A | 55 | 90 | 18 | Bearings, units and housings |
| 85181 | - | - | 50.8 | Seals |
| BK 1012 RS | 10 | 14 | 12 | Bearings, units and housings |
| HK 4018 RS | 40 | 47 | 18 | Bearings, units and housings |
| PFT 30 RM | 30 | - | - | Bearings, units and housings |
| SD 18x24x3 | 18 | 24 | 3 | Seals |
| SNL 505 | 25 | - | - | Bearings, units and housings |
Hot number:
12411
314190
39935
6006/HC5C3
6410 NR
65x97x7 HMS5 V
7020 CB/P4AL
71801 ACD/P4
86240
AOH 24048
C 2212 KV
NAO 30x47x16
OKF 470
SALKB 6 F
Z 203 F
Previous:SY 3. UTF Bearings, units and housings ---- Next:SY 3/4 TF Bearings, units and housings
Return to SKF bearing