| Material | Cast iron | |||



| d | 76.2 | mm | |
| A | 78 | mm | |
| A1 | 48 | mm | |
| B | 77.8 | mm | |
| H | 175.5 | mm | |
| H1 | 88.9 | mm | |
| H2 | 47.5 | mm | |
| J | 228.5 | mm | |
| J | max. | 241 | mm |
| J | min. | 216 | mm |
| L | 305 | mm | |
| N | 38 | mm | |
| N1 | 25.5 | mm | |
| s1 | 47.6 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 5.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.579 | mm | |
| SWN | 11.113 | mm | |
| GN | 1/8-27 NPT | ||
| Dowel pins | |||
| J6 | 285 | mm | |
| J7 | 29 | mm | |
| N4 | 3 | mm | |
| Basic dynamic load rating | C | 72.8 | kN | |
| Basic static load rating | C0 | 53 | kN | |
| Fatigue load limit | Pu | 2.16 | kN | |
| Limiting speed | 2400 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 9.65 | kg |
| Hexagonal key size for grub screw | N | 5.556 | mm | |
| Recommended tightening torque for grub screw | 28.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 20 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.75 | in |
| Housing |
SY 516 U
|
|||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 135x170x12 HMSA10 V | 135 | 170 | 12 | Seals |
|---|---|---|---|---|
| 1313 EKTN9 | 65 | 140 | 33 | Bearings, units and housings |
| 34x44x8 HMS5 RG | 34 | 44 | 8 | Seals |
| 4204 ATN9 | 20 | 47 | 18 | Bearings, units and housings |
| 6371 | 15.875 | 34.93 | 6.35 | Seals |
| AS 0821 | 8 | 21 | 1 | Bearings, units and housings |
| MS 3068-64 | - | - | 24 | Bearings, units and housings |
| NJ 207 ECML | 35 | 72 | 17 | Bearings, units and housings |
| NNCF 4914 CV | 70 | 100 | 30 | Bearings, units and housings |
| OKCX 460 | 460 | - | ||
| SAF 1217 | 85 | - | - | Bearings, units and housings |
| SSAFS 22538 x 6.7/8 | 174.625 | - | - | Bearings, units and housings |
Hot number:
241/710 ECA/W33
307 NR
4996
52214
62307-2RS1
6234 M
7207 BEP
7309 BECBY
BD-C 3084 KM-AOH 3084 G
GEH 45 ESX-2LS
NUKRE 47 A
PSM 222720 A51
PWM 253020
SYJ 90 TF
W 617/7 R
Previous:SY 25 WF Bearings, units and housings ---- Next:SY 3/4 FM Bearings, units and housings
Return to SKF bearing