Material | Cast iron |
d | 40 | mm | |
A | 48 | mm | |
A1 | 30 | mm | |
A5 | 23.5 | mm | |
B1 | 56.3 | mm | |
H | 99 | mm | |
H1 | 49.2 | mm | |
H2 | 19 | mm | |
J | 135.5 | mm | |
J | max. | 146 | mm |
J | min. | 125 | mm |
L | 175 | mm | |
N | 24.5 | mm | |
N1 | 14 | mm | |
s1 | 34.9 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 161 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.85 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1100257 | 279.4 | 317.5 | 19.05 | Seals |
---|---|---|---|---|
239/750 CAK/W33 | 750 | 1000 | 185 | Bearings, units and housings |
32948 | 240 | 320 | 51 | Bearings, units and housings |
38x55x7 HMSA10 RG | 38 | 55 | 7 | Seals |
42475 | 107.95 | 136.55 | 11.13 | Seals |
470861 | 824 | - | - | Seals |
55x100x12 HMSA10 RG | 55 | 100 | 12 | Seals |
6304-2Z/VA208 | 20 | 52 | 15 | Bearings, units and housings |
NKXR 20 | 20 | 30 | 30 | Bearings, units and housings |
PRM 404450 | 40 | 44 | 50 | Bearings, units and housings |
SAF 22516 T | 68.2625 | - | - | Bearings, units and housings |
SD 40x50x4 | 40 | 50 | 4 | Seals |
Hot number:
1150114
2213 ETN9
32313 B
332169 AA
35042
540 VE R
6015 N
99452
86343
FSAF 1516 x 2.3/4
FSAF 1617 x 2.7/8 TLC
NU 228 ECM
PFT 30 RM
PFT 40 RM
SNW 3026x4.3/8
Previous:SY 40 WDW Bearings, units and housings ---- Next:SY 45 FM Bearings, units and housings
Return to SKF bearing