Material | Cast iron |
d | 45 | mm | |
A | 48 | mm | |
A1 | 32 | mm | |
A5 | 23 | mm | |
B1 | 43.7 | mm | |
H | 107 | mm | |
H1 | 54 | mm | |
H2 | 21 | mm | |
J | 143.5 | mm | |
J | max. | 152 | mm |
J | min. | 135 | mm |
L | 187 | mm | |
N | 22.5 | mm | |
N1 | 14 | mm | |
s1 | 32.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 4 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 173 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 33.2 | kN | |
Basic static load rating | C0 | 21.6 | kN | |
Fatigue load limit | Pu | 0.915 | kN | |
Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 2.15 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
125x160x15 HMSA10 RG | 125 | 160 | 15 | Seals |
---|---|---|---|---|
25x45x8 HMSA10 RG | 25 | 45 | 8 | Seals |
26128 | 66.675 | 85.09 | 11.13 | Seals |
3 VA V | 2.5 | - | - | Seals |
34x62x8 CRW1 R | 34 | 62 | 8 | Seals |
608/HR22Q2 | 8 | 22 | 7 | Bearings, units and housings |
6207/VA201 | 35 | 72 | 17 | Bearings, units and housings |
7015 ACE/HCP4A | 75 | 115 | 20 | Bearings, units and housings |
7318 BEP | 90 | 190 | 43 | Bearings, units and housings |
D/W R2 R-2RS1 | 3.175 | 9.525 | 3.967 | Bearings, units and housings |
NJ 219 ECM | 95 | 170 | 32 | Bearings, units and housings |
YSA 213-2FK + H 2313 | 65 | 120 | 65 | Bearings, units and housings |
Hot number:
19x30x8 HMS5 V
22334 CCJA/W33VA405
33113 R
61822-2RS1
7315 BECBM
91327
BT2-8131 A
TQO design
BD-C 3176 KMB-OH 3176 HE
C 3972 KM
FYWK 1.3/16 YTH
NAO 80x110x30
OKCX 760
SAF 22530 x 5.3/8 T
SSAFS 22515 T
Previous:SY 40 WF Bearings, units and housings ---- Next:SY 45 LDW Bearings, units and housings
Return to SKF bearing