Material | Cast iron |
d | 60 | mm | |
A | 60 | mm | |
A1 | 42 | mm | |
A5 | 35.5 | mm | |
B | 65.1 | mm | |
H | 137.5 | mm | |
H1 | 69.9 | mm | |
H2 | 26.5 | mm | |
J | 190.5 | mm | |
J | max. | 202 | mm |
J | min. | 179 | mm |
L | 240 | mm | |
N | 29.5 | mm | |
N1 | 18 | mm | |
s1 | 39.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 222 | mm | |
J7 | 21 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 52.7 | kN | |
Basic static load rating | C0 | 36 | kN | |
Fatigue load limit | Pu | 1.53 | kN | |
Limiting speed | 3400 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 4.35 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1209 ETN9 | 45 | 85 | 19 | Bearings, units and housings |
---|---|---|---|---|
130 VA V | 117 | - | - | Seals |
16x35x7 HMSA10 RG | 16 | 35 | 7 | Seals |
18x30x7 HMS5 RG | 18 | 30 | 7 | Seals |
61940 | 200 | 280 | 38 | Bearings, units and housings |
71911 CB/HCP4AL | 55 | 80 | 13 | Bearings, units and housings |
99452 | 115 | 127 | 23.8252 | Seals |
BT2B 328283/HA1 | 415.925 | 590.55 | - | Bearings, units and housings |
FSAF 1617 TLC | 74.6125 | - | - | Bearings, units and housings |
FSAF 22613 x 2.1/4 | 57.15 | - | - | Bearings, units and housings |
GS 81214 | 70 | 105 | 8 | Bearings, units and housings |
IR 30x35x13 EGS | 30 | 35 | 13 | Seals |
Hot number:
20525
314554 B
6022
7011 ACE/HCP4AL
7219 BEGAM
BSD 3062 C
FYTJ 30 KF
GS 81222
NAO 50x68x20
P 85
PCM 606540 E
SAF 22317
SNP 3256x10.7/16
SNW 30x5.3/8
SSAFS 22520 x 3.5/16
Previous:SY 60 LF Bearings, units and housings ---- Next:SY 60 TF/VA201 Bearings, units and housings
Return to SKF bearing