| Material | Cast iron | |||



| d | 25 | mm | |
| A | 42 | mm | |
| A1 | 27 | mm | |
| B1 | 38 | mm | |
| H | 82 | mm | |
| H1 | 42.9 | mm | |
| H2 | 16 | mm | |
| J | 118 | mm | |
| J | max. | 125 | mm |
| J | min. | 111 | mm |
| L | 165 | mm | |
| N | 24 | mm | |
| N1 | 17 | mm | |
| s1 | 22.5 | mm | |
|
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 155 | mm | |
| J7 | 15 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed | 6300 | r/min |
| Mass bearing unit | 1.23 | kg |
| Appropriate spanner | HN 5-6 | |||
| Recommended lock nut tightening angle | a | 95 | ° | |
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 15867 | 40 | 76 | 12.5 | Seals |
|---|---|---|---|---|
| 24038 CC/W33 | 190 | 290 | 100 | Bearings, units and housings |
| 32004 X | 20 | 42 | 15 | Bearings, units and housings |
| 7205 BEP | 25 | 52 | 15 | Bearings, units and housings |
| 82x120x12 HMS5 RG | 82 | 120 | 12 | Seals |
| FYTJ 40 TF | 40 | - | - | Bearings, units and housings |
| NJ 332 ECM | 160 | 340 | 68 | Bearings, units and housings |
| NKIB 5903 | 17 | 30 | 20 | Bearings, units and housings |
| NU 236 ECML | 180 | 320 | 52 | Bearings, units and housings |
| OKBS 131 | 131 | - | - | |
| OKCX 490 | 490 | - | ||
| PSM 607590 A51 | 60 | 75 | 90 | Bearings, units and housings |
Hot number:
200 VL R
BD-231/560 CAK/W33-OH 31/560 H
45550
59176 F
6308/HR22Q2
8649
727 ACD/HCP4A
7312 BEM
NA 4903.2RS
P 25 RM
RNA 4844
SAFS 22244 T
SY 2.3/4 UTF
W 61807
YAT 215-215
Previous:SYJ 3/4 TF Bearings, units and housings ---- Next:SYJ 30 TF Bearings, units and housings
Return to SKF bearing