| Housing material | Cast iron | |||


| d | 38.1 | mm | |
| A | 49 | mm | |
| A1 | 17.5 | mm | |
| A2 | 33 | mm | |
| A5 | 23.5 | mm | |
| B | 49.2 | mm | |
| H | 115 | mm | |
| H1 | 101 | mm | |
| H2 | 83 | mm | |
| L | 145 | mm | |
| L1 | 88 | mm | |
| L2 | 15 | mm | |
| L3 | 83 | mm | |
| N | 29 | mm | |
| N1 | 19 | mm | |
| N2 | 50 | mm | |
| s1 | 30.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed with shaft tolerance h6 | 4800 | r/min |
| Mass bearing unit | 2.3 | kg |
| Grub (set) screw | G2 | 5/16-24 UNF | ||
| Hexagonal key size for grub screw | N | 3.969 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16038 | 190 | 290 | 31 | Bearings, units and housings |
|---|---|---|---|---|
| 21167 | 53.975 | 76.2 | 7.95 | Seals |
| 305263 D | 200 | 289.5 | 76 | Bearings, units and housings |
| 308-2Z | 40 | 90 | 23 | Bearings, units and housings |
| 71924 CB/P4A | 120 | 165 | 22 | Bearings, units and housings |
| 99269 | 69.85 | 79.375 | 31.75 | Seals |
| N 317 ECM | 85 | 180 | 41 | Bearings, units and housings |
| HA 310 E | 42.8625 | 70 | 42 | Bearings, units and housings |
| MS 3060 | - | - | 24 | Bearings, units and housings |
| NUP 317 ECM | 85 | 180 | 41 | Bearings, units and housings |
| SSAFS 22515 x 2.1/2 T | 63.5 | - | - | Bearings, units and housings |
| W 63803 R | 17 | 26 | 7 | Bearings, units and housings |
Hot number:
180x210x15 HMSA10 V
20x35x7 HMS5 RG
35x47x7 HMSA10 V
401700
53313 + U 313
55x70x10 HMSA10 V
7204 ACCBM
87783
C 4026-2CS5V/GEM9
FY 2.3/16 FM
K 6x10x13 TN
MB 48
S71914 ACD/P4A
SAF 22518 x 3.1/16
SAFS 23028 KATLC x 4.15/16
Previous:TU 1.1/16 TF Bearings, units and housings ---- Next:TU 1.1/4 TF Bearings, units and housings
Return to SKF bearing