| Housing material | Cast iron | |||


| d | 28.575 | mm | |
| A | 37 | mm | |
| A1 | 13.5 | mm | |
| A2 | 28 | mm | |
| A5 | 20 | mm | |
| B | 38.1 | mm | |
| H | 104 | mm | |
| H1 | 89 | mm | |
| H2 | 56 | mm | |
| L | 114 | mm | |
| L1 | 70 | mm | |
| L2 | 10 | mm | |
| L3 | 57 | mm | |
| N | 22 | mm | |
| N1 | 16 | mm | |
| N2 | 37 | mm | |
| s1 | 22.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed with shaft tolerance h6 | 6300 | r/min |
| Mass bearing unit | 1.25 | kg |
| Grub (set) screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1000114 | 254 | 285.75 | 15.88 | Seals |
|---|---|---|---|---|
| 12582 | 31.75 | 57.15 | 6.35 | Seals |
| 23284 CAK/W33 | 420 | 760 | 272 | Bearings, units and housings |
| 30222 | 110 | 200 | 41 | Bearings, units and housings |
| 32022 X/DF | 110 | 170 | - | Bearings, units and housings |
| 32916 | 80 | 110 | 20 | Bearings, units and housings |
| 35x45x7 HMSA10 V | 35 | 45 | 7 | Seals |
| 6523 | 16.6624 | 28.55 | 7.95 | Seals |
| 99196 | 50 | 56.9976 | 16.9672 | Seals |
| GS 89315 | 75 | 135 | 12.5 | Bearings, units and housings |
| NUP 318 ECJ | 90 | 190 | 43 | Bearings, units and housings |
| SI 45 ESX-2LS | 45 | - | 32 | Bearings, units and housings |
Hot number:
1213 ETN9
19992
BD-23164 CCK/W33-OH 3164 H
29424 E
332059
7003 ACE/HCP4AH
BD-C 30/630 KM-AOH 30/630
D/W RW188 R-2Z
FY 1.3/4 TF
FY 2.3/16 TF
K 22x26x17
NJ 2348 ECML
NU 2311 ECML
SAF 23056 KATLC x 9.15/16
W 61802 R-2Z
Previous:TU 1.1/4 TF Bearings, units and housings ---- Next:TU 1.11/16 TF Bearings, units and housings
Return to SKF bearing