Housing material | Cast iron |
d | 33.338 | mm | |
A | 37 | mm | |
A1 | 13.5 | mm | |
A2 | 30 | mm | |
A5 | 22 | mm | |
B | 42.9 | mm | |
H | 103 | mm | |
H1 | 89 | mm | |
H2 | 64 | mm | |
L | 129 | mm | |
L1 | 78 | mm | |
L2 | 12 | mm | |
L3 | 64 | mm | |
N | 22 | mm | |
N1 | 17 | mm | |
N2 | 38 | mm | |
s1 | 25.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 30 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed with shaft tolerance h6 | 5300 | r/min |
Mass bearing unit | 1.6 | kg |
Grub (set) screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1280 VRME R | 1218 | - | - | Seals |
---|---|---|---|---|
32582 | 82.55 | 126.97 | 11.13 | Seals |
TDI design | 501.65 | 711.2 | - | Bearings, units and housings |
61826-2RS1 | 130 | 165 | 18 | Bearings, units and housings |
638/5-2Z | 5 | 11 | 5 | Bearings, units and housings |
7013 CD/P4AH1 | 65 | 100 | 18 | Bearings, units and housings |
85907 | - | - | 31.75 | Seals |
BS2-2214-2RSK/VT143 | 70 | 125 | 38 | Bearings, units and housings |
IR 10x13x12.5 | 10 | 13 | 12.5 | Bearings, units and housings |
NJ 312 ECML | 60 | 130 | 31 | Bearings, units and housings |
NU 2313 ECP | 65 | 140 | 48 | Bearings, units and housings |
SY 15/16 TF | 23.812 | - | - | Bearings, units and housings |
Hot number:
17x40x7 CRW1 R
2200558
241/500 ECA/W33
3307 A-2Z
30049
6004-Z
99298
D/W R4-2Z
NKIB 5906
NU 1018 M
SAF 1615 x 2.3/8
SAF 22622
SIL 17 C
SAW 23536 x 6.3/8
SNW 130x5.5/16
Previous:TU 1.3/8 TF Bearings, units and housings ---- Next:TU 1.7/16 TF Bearings, units and housings
Return to SKF bearing