| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 34 | mm | |
| A1 | 13.5 | mm | |
| A2 | 25 | mm | |
| A5 | 18 | mm | |
| B | 34.1 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed with shaft tolerance h6 | 7000 | r/min |
| Mass bearing unit | 0.84 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 250x280x15 HMS5 V | 250 | 280 | 15 | Seals |
|---|---|---|---|---|
| 56160 | 142.875 | 180.98 | 12.7 | Seals |
| 660 VRME R | 640 | - | - | Seals |
| 750x780x18 HDS1 R | 750 | 780 | 18 | Seals |
| 7005 ACE/HCP4AL1 | 25 | 47 | 12 | Bearings, units and housings |
| 71920 ACE/P4A | 100 | 140 | 20 | Bearings, units and housings |
| 7310 BEGAM | 50 | 110 | 27 | Bearings, units and housings |
| 99450 | 114.3 | 124.46 | 25.4 | Seals |
| 81260 M | 300 | 420 | 95 | Bearings, units and housings |
| GE 120 ES-2LS | 120 | 180 | 85 | Bearings, units and housings |
| HJ 238 EC | 190 | 244.2 | 21.5 | Bearings, units and housings |
| SAF 1522 x 3.13/16 | 96.8375 | - | - | Bearings, units and housings |
Hot number:
17x37x7 HMS5 V
3300300
42340
626
7215 ACD/P4A
75030
BT2B 332497/HA4
NA 6909
NNCF 5013 CV
PSM 060904 A51
SAF 23056 KATLC x 10.7/16
SY 1.3/8 WDW
SYR 1 11/16 N-118
W 61708-2RS1
WBB1-8705-2RZ
Previous:TU 25 FM Bearings, units and housings ---- Next:TU 30 FM Bearings, units and housings
Return to SKF bearing