| Housing material | Cast iron | |||


| d | 30 | mm | |
| A | 37 | mm | |
| A1 | 13.5 | mm | |
| A2 | 28 | mm | |
| A5 | 20 | mm | |
| B | 23.8 | mm | |
| H | 104 | mm | |
| H1 | 89 | mm | |
| H2 | 56 | mm | |
| L | 114 | mm | |
| L1 | 70 | mm | |
| L2 | 10 | mm | |
| L3 | 57 | mm | |
| N | 22 | mm | |
| N1 | 16 | mm | |
| N2 | 37 | mm | |
| s1 | 26.7 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Ra | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed with shaft tolerance h6 | 6300 | r/min |
| Mass bearing unit | 1.2 | kg |
| Grub (set) screw | G2 | M8x1 | ||
| Hexagonal key size for grub screw | N | 4 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16316 | 41.275 | 66.62 | 7.95 | Seals |
|---|---|---|---|---|
| 241/630 ECA/W33 | 630 | 1030 | 400 | Bearings, units and housings |
| 33108 | 40 | 75 | 26 | Bearings, units and housings |
| 6212-2RS1 | 60 | 110 | 22 | Bearings, units and housings |
| 7016 ACB/HCP4AL | 80 | 125 | 22 | Bearings, units and housings |
| 7016 CB/HCP4AL | 80 | 125 | 22 | Bearings, units and housings |
| 7212 BEGBP | 60 | 110 | 22 | Bearings, units and housings |
| OKCX 760 | 760 | - | ||
| OKF 250 | 250 | 555 | - | |
| SIJ 25 ES | 25 | - | 20 | Bearings, units and housings |
| SIKAC 10 M | 10 | - | 14 | Bearings, units and housings |
| SSAFS 23024 KA x 4.1/8 | 104.775 | - | - | Bearings, units and housings |
Hot number:
140 VA V
16 VA V
19x30x8 HMSA10 RG
206
BD-230/630 CAK/W33-OH 30/630 H
75053
7009 ACD/HCP4A
7028 CD/HCP4AL
BT4B 332889/HA1
GEM 70 ES-2LS
GEZH 400 ES
IR 50x55x35
NNCF 4960 CV
SAF 23026 KA x 4.1/2
SAFS 22515 x 2.3/8
Previous:TU 25 TF Bearings, units and housings ---- Next:TU 30 TF Bearings, units and housings
Return to SKF bearing