da | 38.1 | mm | |
Da | 100 | mm | |
Ca | 45.796 | mm | |
A1 | 69.85 | mm | |
ba | 25.4 | mm | |
H | 134.938 | mm | |
H1 | 69.85 | mm | |
H2 | 25.4 | mm | |
J | min. | 187.325 | mm |
J | max. | 200.025 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 38.1 | mm | |
R2 | 17.462 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 33.337 | mm |
Housing |
SAF 609
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1609
|
|||
Taconite seal | TER 18 | |||
|
End plug (suffix Y) |
EPR 3
|
Max. speed for Taconite seal | 2175 | r/min |
P60° | 35.1 | kN | |
P90° | 20.9 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.7 | kN | |
Pa | 3.4 | kN |
Mass pillow block | 8.68 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 82.215 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
249/1320 CAF/W33 | 1320 | 1720 | 400 | Bearings, units and housings |
---|---|---|---|---|
24951 | 63.5 | 87.07 | 9.53 | Seals |
319262 B | 260 | 320 | 80 | Bearings, units and housings |
4944 | 12.7 | 25.07 | 6.35 | Seals |
520x560x20 HDS1 V | 520 | 560 | 20 | Seals |
891/850 M | 850 | 1000 | 90 | Bearings, units and housings |
NJG 2315 VH | 75 | 160 | 55 | Bearings, units and housings |
NUP 2319 ECJ | 95 | 200 | 67 | Bearings, units and housings |
SAFS 22534 TLC | 150.8125 | - | - | Bearings, units and housings |
SSAFS 22534 | 150.8125 | - | - | Bearings, units and housings |
W 6003-2RZ | 17 | 35 | 10 | Bearings, units and housings |
W 63802 | 15 | 24 | 7 | Bearings, units and housings |
Hot number:
11334
2202 ETN9
30x42x8 HMSA10 V
395 VE R
51318
BSA 201 C
BT4B 334075 G/HA1VA901
D/W R168
FYTB 508 M
FYTWK 1.3/8 YTA
FYWR 1.1/4 YTHR
NJ 332 ECML
NKI 80/25
RNU 1011
SY 20 TDW
Previous:SAF 1609 x 1.1/2 Bearings, units and housings ---- Next:SAF 1609 x 1.3/8 Bearings, units and housings
Return to SKF bearing