

| da | 36.513 | mm | |
| Da | 100 | mm | |
| Ca | 45.796 | mm | |
| A1 | 69.85 | mm | |
| A2 | 171.45 | mm | |
| ba | 25.4 | mm | |
| H | 134.938 | mm | |
| H1 | 69.85 | mm | |
| H2 | 25.4 | mm | |
| J | min. | 187.325 | mm |
| J | max. | 200.025 | mm |
| L | 244.475 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 38.1 | mm | |
| R2 | 17.462 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 33.337 | mm | |
| Housing |
SAF 609
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
2 x SR-1609
|
|||
| Taconite seal | TER 17 | |||
|
||||
| End plug (suffix Y) |
EPR 3
|
|||
| Max. speed for Taconite seal | 2175 | r/min |

| P60° | 35.1 | kN | |
| P90° | 20.9 | kN | |
| P120° | 13.3 | kN | |
| P150° | 12 | kN | |
| P180° | 14.7 | kN | |
| Pa | 3.4 | kN |
| Mass pillow block | 8.68 | kg |
| Cap bolt |
2 x 1/2-13 UNC
|
|||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 82.215 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 3525862 | 895.35 | 971.55 | 20.65 | Seals |
|---|---|---|---|---|
| 99167 | 42.8752 | 48.4124 | 11.1252 | Seals |
| BT4B 331346 A/HA1 | 558.8 | 736.6 | - | Bearings, units and housings |
| FYJ 513 | - | - | - | Bearings, units and housings |
| HCRE 090 R | 127 | 660 | - | Coupling systems |
| HK 4012 | 40 | 47 | 12 | Bearings, units and housings |
| LM 11949/910 | 19.05 | 45.237 | 15.494 | Bearings, units and housings |
| NUP 326 ECP | 130 | 280 | 58 | Bearings, units and housings |
| SD 19x27x4 | 19 | 27 | 4 | Seals |
| W 61912-2Z | 60 | 85 | 13 | Bearings, units and housings |
| WS 81230 | 150 | 14.5 | Bearings, units and housings | |
| YAR 208-2RF/HV | 40 | 80 | 49.2 | Bearings, units and housings |
Hot number:
22332-2CS5K/VT143
24056 CC/W33
594334
7012 ACE/HCP4AH1
7228 ACD/P4A
87807
BD-C 3232 K-H 2332 L
FSAF 1316 T
FY 1.1/2 WF
NCF 2930 CV
PCM 556025 E
S7007 CB/HCP4A
S7022 ACE/HCP4A
SAFS 22518 x 3.1/8 TLC
SNW 8x1.1/4
Previous:SAF 1609 Bearings, units and housings ---- Next:SAF 1609 x 1.1/2 Bearings, units and housings
Return to SKF bearing